* Implement macro recording
* Remove off-by-one from the macro recorder
* Holding both modifiers enables the third layer
* Exit the 3rd layer into one of the secondary ones
* Regular Enter and Escape on the secondary layers
Useful for the macro recording because the "tap" modifiers always act as
modifiers there.
* Remove the buffer overflow from the macro recorder
When the limit is reached, the backlight blinks with each keypress.
* More robust macro recording implementation
* Macro record refactoring and improvement
- support for a second macro (saved using the end of the macro buffer)
- improved reliability
* Add comments to my macros
* Macro recording: remove a redundant code
* Separate the raise+lower layer from the special layer
* Add back/forward keys
* Bind mouse movement
* More readable KC_TRNS
* Improve the mouse bindings
* Use a convenience macro instead of the low-level ACTION macro
* Add mouse to the Dual layer; make most of the layer transparent
* New "mouse" layer; clean up the "special" layer
* CapsLock, NumLock and ScrollLock on the Special layer
* Enable my fix for the stuck modifiers and adjust the dual layer to it
* Fix the macro recording after enabling the stuck mods fix
* Click with Lower/Raise+Space
* Reduce the memory used by the macro recording
Previously the auxiliary layers were numbered 30 and 31 which resulted
in all 32 array elements being allocated regardless of the actually
used layers in the user code.
* Optimize source_layers_cache for the cache memory
Swapping the array indices should increase the locality of the memory access.
* Remove the mouse layer
* Use update_tri_layer to simplify the code
* Add some custom per-keymap build options
* Add ShiftLock
* Secure the reset button
* Add numeric layer
* Remove explicit layer keys on LW and RS layers
* Replace Alt+left/right with Back/Forward keys
* Sleep/delay key (for macro recording)
* App/menu key
* Fix stuff after merging to master
* Local per-keymap config.h; minor cleanup
* Remove the old macro_record.h
Replaced with dynamic_macro.h
* Adjust my keymap to the current API
* Pure Pro Gaming layer
Accessible by double tapping the Pure Pro layer. It features switched
Lower and Raise layers, for one-handed access to numbers.
* Pure Pro Gaming layer: no Mod4, persistent number layer under RShift
* Pure Pro Gaming layer activated with long press, not double press
* Reduce the size of the vifon keymap
See: issue #930
* Increase the dynamic macro buffer
The default was actually decreased. The actual used value didn't change.
* Add the context menu key
* No more strange ideas in the gaming layer
* Reduce the firmware size by disabling API_SYSEX_ENABLE
* Make slash available on the PP layer (replaces the RESET key)
* Add a generic "hold this key" macro
* Add a missing undef
* Turn LGUI in the gaming layer into LW instead of disabling it
It's not as disruptive as LGUI and it makes the LW/RS order kind of
more consistent (LW on the left, RS on the right).
* Refactor the Pure Pro Gaming layer
* Try out the 1st party qmk KC_LOCK (vs my own KM_HOLD)
* Alternative way to switch keyboard layouts with the left hand
* Add dot & slash to the Pure Pro layer (but not to the Gaming layer)
* Now that there is a second KM_LW, we can simplify the layout a bit
It was confusing to have the modifiers completely swapped. Just
moving them is much more natural.
* Disable the console now that qmk got bigger
* Update the keymap for the modern qmk standards
Adds maximized DZ60 Plate B layout macros in ANSI and ISO, featuring 2.25u Left Shift (1.25u/1u split for ISO) and 1.75u Right Shift with Inverted-T arrow keys. Also supports Split Spacebar and Split Backspace.
* Added pteron files made via from kbfirmware.com.
* Added readme.
* Made some progress on Pteron keymap.
* More keymap.
* Updated bootloader, added some keymap illustrations.
* Moved default keymap to FSund, made default keymap from default preonic keymap.
* Fixed typo in default pteron keymap.
* Made changes recommended by drashna.
* handwired/ibm122m: refactor
Refactored layout macro and keymaps to more closely resemble the keyboard's physical layout.
* handwired/ibm122m: add Configurator support
* Update userspace with common config.h
* Add my dz60, satan and xd75 keyboard keymaps
* Fixing executable bits changed during last upstream merge
* Cleanup unnecessary files and defines
* Remove unnecessary defines from userspace config
* Generate a new project for the KBD4x
* Specify the possible layouts for the KBD4x - MIT and grid
* Fill out the readme for the KBD4x
* Configure the default keymap and wiring configuration as specified on http://qmkeyboard.cn/
* Add info.json for QMK Configurator
* Enable backlight support for the KBD4x
* Standardise on LAYOUT_planck_mit/LAYOUT_ortho_4x12 layout names
* Add whitespace so the Readme will render correctly
* Disable mouse keys support for the KBD4x to make the firmware small enough
* DZ60: Deleted K214 from LAYOUT_all
* DZ60: Delete matrix LAYOUT_2_shifts; replace with LAYOUT_all
After the deletion of K214 from LAYOUT_all, LAYOUT_all and LAYOUT_2_shifts are identical.
Deprecated LAYOUT_2_shifts in favor of LAYOUT_all.
* DZ60: refactor 256k_HHKB and itsaferbie keymaps to use LAYOUT_60_hhkb macro
Both keymaps previously used the LAYOUT_hhkb macro. After comparing the macros, the only difference between them was that LAYOUT_hhkb included the place of the ISO Backslash key. Neither keymap used this key, so both were refactored to use LAYOUT_60_hhkb instead.
LAYOUT_hhkb is now essentially unused by any keymaps in the repo. (More on that in a moment.)
* DZ60: bugfix for dbroqua keymap
This keymap had two layers that used the LAYOUT_true_hhkb macro and a third that used LAYOUT_hhkb. These macros have the same number of keys, but represent different physical layouts. As the "main" layers used LAYOUT_true_hhkb, switched the third layer to LAYOUT_true_hhkb as well.
The LAYOUT_hhkb macro is now unused by any DZ60 keymaps in the repo, and can be safely deleted.
* DZ60: bugfix for 60_ansi_arrow_fkeys, 60_plus_arrows, and stephengrier keymaps
All three keymaps had one layer in LAYOUT_all and one in LAYOUT_directional. Only difference between these macros is LAYOUT_all excludes the ISO Backslash position. As none of the keymaps used this position, all layers were switched to use LAYOUT_directional.
* DZ60: added layout mock-ups to dz60.h
Documenting the physical layouts that go with each matrix.
* DZ60: replace TMK SHIFT_ESC with QMK Grave Escape
Replaced all instances of keycodes that called TMK's ACTION_FUNCTION(SHIFT_ESC) with QMK's KC_GESC, and added config.h files so KC_GESC behaves as the deprecated TMK function did, except for the default keymap, which I thought should have the QMK standard behavior.
* DZ60: delete SHIFT_ESC code blocks
Deleted ACTION_FUNCTION(SHIFT_ESC) code blocks from keymaps that didn't use the functionality it provided.
* DZ60: deleted unused MODS_CTRL_MASk definitions
Was used in the now-deleted SHIFT_ESC code blocks. Interestingly named MODS_CTRL_MASK when it was actually checking the Shift keys. *shrug*
* DZ60: refactor jkbone keymap to use process_record_user
Replaced TMK action_function keycodes with QMK process_record_user equivalents.
* DZ60: delete unused layout macros
The macros LAYOUT_hhkb, LAYOUT_directional_625_space, and LAYOUT_60_ansi_split_bs_rshift_5x1u were unused by any keymaps in the repo, and have thus been deleted.
* DZ60: refactor iso_6u_space and iso_7u_space keymaps
Both keymaps refactored to use the LAYOUT_60_iso macro.
* DZ60: refactor dz60.h
Updated the notation of the switch arguments. Format is now:
`k<row><column>`
where `<row>` is `[0-4]` and `<column>` is `[0-9a-e]`.
* DZ60: refactor LAYOUT_60_iso_5x1u matrix
Updated matrix so `KC_ENT` belongs on the home row, which is consistent with LAYOUT_60_iso for the DZ60 as well as the ISO community layouts.
* DZ60: fix white space in dz60.h
I hate when indentation is inconsistent within a file.
* Enabled unicode support and send_unicode function
* Unicode cleanup
* More unicode tweaking
* Update EEPROM stuff
* Account for keyboard macros
* Switch Equal to Plus on Ergodox
* more tweaks
* Minor Unicode tweaks
* Correct matrix printing for keylogger
* Fix unicode functions
* Fix unicode mode set since it actually uses EEPROM
* Re-add DISABLE_LEADER
* Ergodox is easier to hit the tapping term, fix that
* Fix stupid type on unicode mode check
* Preliminary CRKBD/HeliDox support
* Fixes to Helidox
* Cleanup userspace from old merge stuff
* Remove CCCV sounds
* Make Mode NOEEPROM Again
* Add Function level EEPROM configuration
Add kb and user functions for EEPROM, and example of how to use it.
* Bug fixes and demo
* Additional cleanup
* Add EEPROM reset macro to example
* Forgot init function in list
* Move eeconfig_init_quantum function to quantum.c and actually set default layer
* See if removing weak quantum function fixes issue
* Fix travis compile error
* Remove ifdef blocks from EECONFIG so settings are always set
* Fix for ARM EEPROM updates
* Fix merge issues
* Fix potential STM32 EEPROM issues
* Use proper function levels
* Add matrix init functions
* Convert KEYMAP to LAYOUT
Or @mechmerlin is going to hunt me down and harm me... probably :)
* Fix conflict issues
* Add personal KC60 keymap
* Update personal KC60 keymap
* Keymap update 2018-05-30 01:53 UTC-7
* Added macro: T_PEEKR
* Added macro for MacOS Select All; modified MacOS function layer
* Added git branch-name macro
* Added GitHub signature macro
* Added readme files
* Added Quake 2 and System layers
* Refactored keymap readme
* Refactored to add userspace files; added Colemak layer
* Minor code cleanup; updated readme files
* Reverted use of userspace
Decided not to make use of the Userspace feature at this time. Reverted its addition, and updated the readme files where needed (they were linking to userspace files).
* Updated per review comments by @drashna
* Refactor buggy macros
I'm still not sure these work properly
* Fix Windows shortcuts
* Fix Mac shortcuts, possibly
Untested; still may be broken.
* Remove PREVENT_STUCK_MODIFIERS from config.h
Deprecated by #3107
* Custom keymap for the ErgoDone
The keymap supports QWERTY and COLEMAK MOD-DH with LED indication.
* Enable Space Cadet Shift
* Fix after-boot layer indicator LED
* Implement keyboard suspend, move layer LED handling to function, unify
identation
* Add readme.md with layout
* Optimize LED handling, add include guard
Read the default layer via the proper EEPROM function, so the calling of
bootmagic() is no longer necessary.
Fix bug when the CapsLock LED wasn't working anymore after a layer
switch.
* deleting arkag branch, forcibly moving changes over to master
* fade_color function added, not tested
* added half functions some stuff
* surround_type function implemented and working.
* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes
* added a fade state machine and functionality
* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout
* changes to sleep breath function, changed how I will switch to HALMAK
* support for halmak added
* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid
* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.
* reformatted some if statements in state detection
* changes to force fade to pause on boot, or plug in.
* Attempting to move over to userspace, pushing to repository for help
* userspace stuff....
* userspace stuff....
* layout changes, working userspace,
Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY
* Layout change
Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.
* Removed excessive tabs in files
* Moved mods on homerow around...
* changes recommended by @drashna
* removed homerow mods, more flashy lighting!
* changed delays for lighting.
* velocikey code retro fit into userspace to match typing speed
currently "working" but isn't as reactive as I want.
* Readme and other documentation hidden throughout code
* Added a pretty picture
* pretty picture actually added
* More readme updates
* Velocikey now working inside my userspace!
* Changed repo macro and fixed readme
* Removed media layer, moved media control to LAZY layer
* fixed more merge issues when I had to merge...
* implemented some leader key stuff
* removed merge garbage...
* changes requested by @drashna, leader key switch from macros
* Add basic support for the YD68 / YD68v2.
Keymap and WS2812 underlighting work. Capslock LED should work, though I don't have one populated to test. Backlight LEDs are not set up, as they're not on a hardware PWM pin, could be set up as software.
* Fix Imgur link
* Fix default keymap to match the stock firmware
* Fix the Hardware Supported line and add a short description
Messed up in my previous PR (#4017) by providing the wrong matrix name.
Fixing by changing the matrix name instead, because there's only one at this point. Thought it made more sense this way.
* Helix: make rgblight modes selectable.
No change in build result.
* edit the comment of helix/rev2/keymaps/default/keymap.c
* Helix led_test keymap: reduced the size.
* Disable Leader to reduce firmware size for Travis
* Additionaly fixes to USB_USB\BLE Keyboard converter
* Disable One Shots to get USB to USB BLE converter to fit
* Update for SEND_STRING usage
Update for SEND_STRING usage.
Sending keyboard reports (kbd, nkro) now obey the minimum polling time.
While attempting to send a keyboard report and waiting for a USB poll, other functions of the keyboard, including LED effects and power management, will continue to operate at their intended intervals.
* Updates for send string, syscalls, stdio, debug prints, auto shift
Now properly waiting for previous keys sent over USB to complete before sending new.
Added heap to linker and now compiling with syscalls support.
Removed custom string functions and now using stdio.
dprintf now works as intended through virtser device.
* CTRL and ALT keymap updates
CTRL mac keymap updated
ALT default and mac keymap updated
ALT rules.mk added Auto Shift with default no
* Code cleanup as per discussion with vomindoraan
Code cleanup as per discussion with vomindoraan
* model01: implement RGB matrix feature
LEDs can still be individually controlled if this is switched off.
* model01: use fast banked LED setting commands
* model01: update default keymap to use RGB matrix
* model01: update RGB matrix support to match common_features.mk
* rgb_matrix: include <string.h>
This was missing after commit 4d5705ea6c
which introduces a use of memset().
* model01: make g_rgb_leds weak
This allows users to override which LEDs are configured as
modifiers, or tweak the x/y coordinates, should they so choose.
* Initial commit of RAMA U80-A
* Initial commit of RAMA U80-A
* Moved IS31FL3736 driver, minor cleanups
* Superficial stuff
* Review changes
* Refactored to use common code.
* rgb_matrix: use a driver ops struct
This is intended to avoid #ifdef proliferation on adding more drivers,
eg. model01, which use different architectures.
* rgb_matrix: document driver struct members
* rgb_matrix: remove unused LED testing code
* rgb_matrix: don't build into IS31x drivers unless being used
* rgb_matrix: refactor make config options
This ensures that the necessary files are included for any custom
RGB_MATRIX_ENABLE value, without having to add entries here for specific
boards. This particularly affects model01 because its controller is
integrated and won't be used anywhere else, so it's preferable not to
put it in common_features.mk.
This now validates the value of RGB_MATRIX_ENABLE.
It was necessary to fix an error in ergodox_ez rules.mk using the wrong
comment separator, yielding an invalid value.
* IS31x drivers: don't write the control registers all the time
This is only needed when they are changed. This is done in init() and
board- or keymap-specific code is free to make further changes.
* rgb_matrix: move structs from chip drivers to rgb_matrix_drivers.c
This approach is specific to the rgb_matrix functionality, so keep it
neatly separated from the raw chip drivers.
* holefully correct error in mtdjr userspace for layer_state_set_user
* return state and wrap rgb actions in their own conditional
* mtdjr nyquist and userspace updates
* mtdjr updates as requested
* pull out toad keyboard and get it compiling
* refactor xmmx
* use the correct LAYOUT macros
* move LED code out to toad.c file
* move LED code out to xmmx.c file
* adjust for correct number of columns and pins used
* remove led set user
* Rename constexpr keymap folder to konstantin
* Replace numpad comma with Unicode comma
* Rename tap dance constants
* Move record->event.pressed check into switch
* Use RShift as a dedicated Fn key
* initial commit
* Update readme.md
* Update keymap.c
added comment for description of function to control LED as layer indicator
* corrected formatting as requested.
* format for configurator
* corrected info.json to propertly reflect layout in Configurator
* updated layouts to reflect physical keyboard
* comment out BACKLIGHT BREATHING in config.h
* deleting arkag branch, forcibly moving changes over to master
* fade_color function added, not tested
* added half functions some stuff
* surround_type function implemented and working.
* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes
* added a fade state machine and functionality
* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout
* changes to sleep breath function, changed how I will switch to HALMAK
* support for halmak added
* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid
* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.
* reformatted some if statements in state detection
* changes to force fade to pause on boot, or plug in.
* Attempting to move over to userspace, pushing to repository for help
* userspace stuff....
* userspace stuff....
* layout changes, working userspace,
Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY
* Layout change
Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.
* Removed excessive tabs in files
* Moved mods on homerow around...
* changes recommended by @drashna
* removed homerow mods, more flashy lighting!
* changed delays for lighting.
* velocikey code retro fit into userspace to match typing speed
currently "working" but isn't as reactive as I want.
* Readme and other documentation hidden throughout code
* Added a pretty picture
* pretty picture actually added
* More readme updates
* Velocikey now working inside my userspace!
* Changed repo macro and fixed readme
* Removed media layer, moved media control to LAZY layer
* fixed more merge issues when I had to merge...
* create: biacco jis keymap for windows for Ergo42
* fix: biacco-winjp: change #ifndef to #pragma once.
* fix: following: 3935#pullrequestreview-157941685
* First version of FollowingGhosts' custom layout
* Added copyright etc.
* Fixed readme and added space cadet shift
* Moved from RGB to HSV, updated readme and added media keys
* Updated pragma
* Added play/pause and updated config
* Added pragma back
* added my planck keymap
based on a blend of my minivan keymap and the planck default keymap.
* moved pipe to better match minivan keymap
* updated as per @drashna
also moved my keymap a bit after adding the quad encoder and underglow
(which doesn't even work on arm right now lol)
* a few smaller tweaks
* Crkbd: move I2C and Serial defines to keyboard's config.h
per @drashna on Discord
* Crkbd: remove misleading comment re: I2C and Serial
USE_I2C and USE_SERIAL are usually a "one or the other"-type deal, but this keyboard uses both.
* funged git history, restarting
* tested and working (message typed on this)
* updated documentation to include wiring directions
* formatting
* updated matrix and default layout a bit
* getting ready for merge into main repo
* getting ready for merge into main repo v2
* cleaning
* cleaning repo of extranious files
* updated documentation
* initial check in
* figure out the column pins
* temporary keymap
* guess the row pins
* fix matrix.c compilation errors
* use the LAYOUT_60_hhkb macro and tweak the keymap a little bit
* update readme
* Put my name everywhere
* Add QMK Configurator support
* figured out the row pins
* update readme to have reset info
* Fill in some blanks that are documentation related
* Update matrix.c
* add kb functions
* forego kbfirmware labeling
* add arrows and caps lock to function layer.
* add a LAYOUT_60 and LAYOUT_all macro
* missed a comma
* add configurator support for the two new LAYOUT macros
* Jack helped me with a new custom matrix
* add 60_ansi into rules.mk
* deleting arkag branch, forcibly moving changes over to master
* fade_color function added, not tested
* added half functions some stuff
* surround_type function implemented and working.
* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes
* added a fade state machine and functionality
* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout
* changes to sleep breath function, changed how I will switch to HALMAK
* support for halmak added
* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid
* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.
* reformatted some if statements in state detection
* changes to force fade to pause on boot, or plug in.
* Attempting to move over to userspace, pushing to repository for help
* userspace stuff....
* userspace stuff....
* layout changes, working userspace,
Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY
* Layout change
Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.
* Removed excessive tabs in files
* Moved mods on homerow around...
* changes recommended by @drashna
* Added template copies for prime_l
Added first set of files for prime_m and prime_o
Temporarily storing kbfirmware dumps in tmp
* Completed base for prime_m, prime_o and prime_l
Moved prime_r into primekb folder
* Added in QMK Configurator layout files for new PrimeKB keyboards
Slight modification to layout header files
Added my name to licensing
* Updated primekb readmes
* Removed temporary working files
* Updated default keymap for Prime_O
* Added link to Newbs Guide in prime_r readme
* make bpiphany directory with simple readme file
* move unloved_bastard to bpiphany directory
* move frosty_flake to bpiphany directory
* move pegasushoof to bpiphany directory
* move tiger_lily to bpiphany directory
* add a little more info to readme
* move kitten_paw to bpiphany directory
* update make instructions
* update intro text
* add missing routines to matrix.c of unloved_bastard
* add missing routines
* initial commit
* Update readme.md
* Update keymap.c
added comment for description of function to control LED as layer indicator
* corrected formatting as requested.
* format for configurator
* corrected info.json to propertly reflect layout in Configurator
* updated layouts to reflect physical keyboard
* Create layout for JD45
* Tweak layout to better support JD45 and add more tap dancing.
* Add Maltron and tweak layout for 40% enter compatibility.
* Switch back to `BL_TOGGLE` for backlight.
* More tweaks
* Rename talljoe_gherkin to talljoe-gherkin
* Make NAV layer tab C_S_T also.
* Add missing RESET key.
* Add Talljoe layout for minivan.
* MTI is not for me
* Tweak keymap.
* Add talljoe keymap to Atreus.
* Minor tweaks.
* Fix talljoe keymaps to work with new Zeal60 commit.
* Added QMK support for GSKT-00, PaladinSplit, PaladinTKL and PaladinPad pcbs
* Remove the paladin boards from this PR
* Changed gskt00 as per review comments. Added two new default layouts, 60_ansi_tsangan and 60_iso_tsangan
* Fix the layouts/default/60_iso_tsangan/layout.json file
* Removed ? from rules.mk, removed unused fn_actions from keymaps. Changed the 60_iso_tsangan to work correctly
* Removed PREVENT_STUCK_MODIFIERS
* Keyboard: add Keyboardio Model01
This port implements key scanning and everything in their default
keymap.
It doesn't implement mouse warping; QMK can't do that (yet).
LED control is mostly not implemented. The ability to set all LEDs is
included because they can get stuck on coming from the bootloader
otherwise. Single LED control is also implemented for numpad indication.
The scanners also support batch LED transfer which is what you'd need if
you wanted to do fast effects. Gamma correction is also not implemented,
but is present in the original firmware. The necessary info for further
implementation is in the KeyboardioScanner module for Kaleidoscope.
To install on your keyboard:
make model01:avrdude
When prompted, hold the "prog" key on the keyboard to put it into
programming mode. This can also be achieved by holding the "prog" key
while plugging in the keyboard. This works even if the firmware is
corrupt or missing.
Hot plugging the halves seems to work fine, but there is no explicit
support for eg. making sure the matrix scan rate is reconfigured.
* model01: clean up includes and include guards
Uses #pragma once everywhere.
* model01: split LED and matrix code
This makes space if someone wants to implement better LED support
later on, the keyboard is a lot more capable than the current code.
* model01: separate I2C timeouts for matrix vs. LED
If the scanners have no data they don't ACK reads and just time out.
So we want a pretty short timeout to keep scan rates high.
Meanwhile the LED transfers might take longer - I don't know though,
so here we are conservative.
* model01: implement better LED control
- gamma correction from the manufacturer's firmware
- suitable delays to allow back to back LED writes
- this is fast enough to write the whole keyboard without noticeable
delay, in my experience
- minor bug fix: RHS Fn key was not addressable
* model01: add license to wire-protocol-constants.h
* model01: replace gamma LUT
The original was of unclear license origin. This one is functionally
identical and includes a generator should people wish to adjust it.
* model01: use the already-present CIE1931 lightness curve
...rather than baking in another gamma curve.
It's said that CIE1931 is the right thing to be using rather than gamma.
OK. Let it be so.
* model01: call matrix_init_user() from matrix_init_kb()
* model01: remove inapplicable config options from rules.mk
* model01: readme.md: update build environment links
* Add flashing instructions for Linux
* Make device/manufacturer name consistent for ymd96
* Disable command mode by default for YMD96
* Add function call to fix backlight for YMD96
* Add personal YMD96 config
* Replace include with QMK macro
* Move KEYMAP macro to keymap-level folder
* Move custom KEYMAP macro to global LAYOUT_iso macro
* Change transparent keymappings to global definition
* Remove unecessary import and change to pragma once
- (instead of repeated ifdef)
* Remove global keymap/layout definition
* Remove chording as it is not documented, not used, and needs work.
* Make Leader Key an optional feature.
* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`
* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
* Arrow keys are now arranged on hjkl (vi style)
* The escape key is moved on capslock, shared with func layer switch
* The grave key is now dedicated (not shared with escape)
* Add a new numpad layer that can be activated with the spacebar
* Fix layout mismatch between layers
* Use bult-in underscore KC_TRNS alias
* add my config
* fix backlight, clean up that code
* group background code, restore static var
* qwerty is supposed to be in the middle
* wrap layer change backlight in ifdef
* backlight levels and some more 'emojis'.
* Restructure to make it possible to press cmd ent on the right side of the board with one hand.
* Expose the period through the number layer. Add Hyper keys to mouse layer
* reduce mouse speed
* add a : -P key
* Thumbs up and down, remove some keys that are duplicated via function keys, clean up
* fix build issues
* add various emoji
* duplicate default Meira keymaps
* Miera updates
* add documented but unmapped emoji
* Sound for the Meira, was stumped by a file size! Thanks drashna!
* add docs
* docs
* revert lib changes...
* clean up
* clean up
* remove make file
* Fixes missing key
* clean up
* add my lets split
* add more emoji
* add the telophase board (unofficially, I guess...)
* add missing files
* add/reset files
* Review feedback implementation: Not needed. Add #define FLIP_HALF to your config.h file instead.
* Review feedback implementation: All of these includes should be replaced with #include QMK_KEYBOARD_H.
* Review feedback implementation: [FAILING] You may want to use LAYOUT_ortho_4x12 instead, and move this to /layouts/community/ortho_4x12/ instead. That way, you can use the same keymap for all of the boards.
* clean up
* add a key for command tilde (osx loves it)
* at least its building again
* remove adjusts and migrate layer switching to MO(_LAYER)
* update the telophase readme
* update the telophase readme
* grahampheaths -> grahampheath
* ONEHAND_ENABLE -> SWAP_HANDS_ENABLE
* convert lets split to use ortho_4x12
* Move lets split keyboard layout into community/ortho_4x12
* make telophase use LAYOUT()
* I did it?!
* Add clap and grin
* swap tabs and back and forward
* whitespace
* Add ellipsis and thanks emoji
* Move flip_half to telophase config (conflicts with lets split layout)
* Use #pragma once instead of config_user_h
* remove unused stuff
* Initial version of zeal60
* WIP
* Fixes issue #900
* Adding RGB underglow functionality.
Fixed a compile-time conflict caused by enabling RGB underglow functionality.
* Refactor RPC protocol
* Fix last merge
* README for RGB underglow updated.
* Additional README changes.
* Adding RGBW strip software-based current-limiting functionality.
* RGBW current-limiting functionality should be handled by RGBSTRIP_MAX_CURRENT_PER_LIGHT instead.
* Updated README to reflect implementation of built-in current limiting.
* Keymap readability improvements.
* Minor keymap improvements.
* Fixed LED driver init sequence, formatting
* Dimming implementation tested, working.
* Stab LEDs synced with spacebar hits in effects.
* RGB underglow tested and functional. Simplified README for RGB underglow.
* Undid accidental file deletion from previous merge conflict. Safer values for RGB underglow.
* Improved arrow key positions in keymap.
* Added functionality to correct uneven RGB underglow. Refactored related code.
* Reverted to safer values for underglow.
* Changes for v0.3
* Custom LED brightness scaling will take place after current adjustment in order to avoid being overridden.
* Create keymap.c
Added split backspace and split shift to ISO layout
* Create config.h
Turned on LEDs for new layout
* Fixed bug where left spacebar stabilizer LED (LC06) would adopt color of row above.
* Added hhkb_wilba keymap
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Added indicators, full param setting via host
* Added "mousekey" layout
* Added Zeal65 support, factory test mode
* Keycode safe range changed, caused bugs
* Bumped EEPROM version due to change in QMK keycodes
* Disable HHKB "blocked" LEDs if KC_NO in keymap
* Added "disable_hhkb_blocker_leds"
* Required overridden function for keymaps in EEPROM
* Added polar coordinate mapping, effect speed
* Force Raw HID interface number to 1 always
* Fixed last merge from master
* Added effect speed to default keymaps
* add BACKLIGHT_ prefix to vars
* add BACKLIGHT_ prefix to vars
* Keymap speed effect; keymap improvements/fixes
Readme updated to match changes
* Refactored to use common IS31FL3731/I2C drivers
* Fixed make rules, backlight disabled feature
* Make split rightshift default for Zeal65
* Added M60-A as a "version" of Zeal60.
* Renamed IS31FL3731 driver functions
* Fix suspend_wakeup_init_kb() being defined twice
* First pass refactor dynamic keymaps
* Updated to changed I2C and ISSI drivers
* Refactor zeal_color.* usage to quantum/color.*
* Updated Zeal65, fixed dynamic_keymap
* Major refactoring of Zeal60 backlight and API
* Lots of little cleanups
* Added readme.md
* Added readme.md
* Added LAYOUT_60*() macros, refactored and cleaned up default keymaps
* Fix compile error in suspend.c
* Added Zeal65 LAYOUT macros, info.json
* Added rama/m60_a, deleted zeal60/keymaps/m60_a
* Fixed rama/m60_a/keymaps/proto
* Fixed compilation error for suspend.c
* Requested changes for PR
* Fixed readme.md images
* Another readme.md fix
* Added drashna's requested changes
* move tv44 to thevankeyboards directory
* move bananasplit to thevankeyboards
* move roadkit to thevankeyboards directory
* add a basic readme
* update readmes to correct the make instructions and add more help text
* rename tv44 to minivan as per Jack's suggestions
* update readme
* rename tv44 to minivan
* update tv44 to minivan
* change includes for tv44 to minivan
* remove extra includes
* rename alf_x2 to alf
* rename to x2
* rename dependencies
* Fix readme
* moved x2 into alf directory
* update readme for make instructions
* move dc60 to alf directory
* update dc60 readme for make instructions
* change readme txt as per noroadsleft PR comment
* ALT keymap update
Added additional End key on layer 1 to match key cap
* LED driver update addressing PR #3871
Update sync between IS31FL3733 drivers is causing varying behavior in keyboards including brightness mismatch and slight flicker at very low rgb values. Visually, disabling sync is not noticeable. Ref PR #3871 by guarnacciaa.
* add SCREEN_NAV layer for copy/pasting within screen
* working readreg/paste macros
* working read reg / paste macros
* write log and tran patterns, and expand
* add ls -la shortcut, add tab on combined layer
* put delete word on the right pinky key on shell_nav layer
* add TAB on the right side, add reset key
* added Cloud9 macros
* add cloud9 shortcuts to atreus layout
* added BROWSER_CONTROL layer
* finalized browser control layer
* adding comment
* add browser control layer to atreus
* add flashing command line
* remove the tab on combined layer
* remove the tomouse
* remove mouse layer, change log/tran expand patterns, cleanups
* add dumptlog macro
* add "delete to home" shortcut
* fix conflict
* remove unneeded mouse layer
* add meh shortcuts on the browser_control layer
* add/modify some macros
* explain the various layers
* putty paste is right mouse button
* Add own personal Contra layout
* Enable auto-shifting
* Enable tap dancing and implement Space Cadet-like shift with LSHIFT and ENTER
* Implement Colemak Mod-DH layout, clean up Adjust layer
* Implement keyboard and keymap refactor
More info: https://github.com/qmk/qmk_firmware/pull/3191
* Update the readme.md and keymap.c files for Colemak
* Add include guard, make layout description cleaner
* Updated info.json for Duck Jetfire
Generated a new info.json file. @mechmerlin asked my help in debugging this file. Firmware works as expected if built from source, but not if built from the Configurator.
* Corrected the position of the arrow keys in LAYOUT_all
* Add my own keymap to the list of available Redox keymaps.
This keymap is a Colemak keymap, and is meant to be used on Mac OS.
More information can be found in the readme.
* Fix "macOS" typo and remove mention of the license.
This directory inherits the project's license.
* Add missing custom keycode.
* Address feedback from PR review
- Remove deprecated code
- Remove RGB logic since it is overwritten by code running later.
* Added HHKB with 7U space bar
There are backlight changers on the function Z, X and C, mediat controls
have been removed.
* Fixed the default layout and added a keymap
GUI and ALT keys were swapped.
My own keymap which adds calculator, removes power, removes eject.
* Adjusted naming convention of hhkb layout layer
Fixed as per required from code review.
* Updated for qmk configurator
I didn't realise that there was a new standardisation across all the keymaps to accommodate the configurator.
Hopefully fixed now.
* rename 68_ansi layout to 65_ansi layout
* more renames and readme change
* add company names
* add community layouts for 68_ansi
* add 68_ansi support for mf68 type boards
* update readme
* - Fixed DK60 version in config.h
* - Updated dk60 readme with new QMK rules
* - Fixed wording in readme
* Added dbroqua layout for DZ60
I've also updated dz60.h to add "true HHKD" keymap definition (6U
spacebar).
With the default HHKB definition r_alt was not mapped and when I pressed
r_menu it was r_alt.
Regards
* Updated dbroqua layout for HHKB keyboard
Added default configuration and alternate (swap gui/alt keys).
Save user choice in keyboard memory (like plank, thanks for this
feature!).
* Added dbroqua layout for Iris keyboard
* Updated layout and fixed includes
* Added personal layout for FC660C
* Inverted ESC & GRV
Corrected the make examples by adding the parent directory.
Updated the QMK Docs links for the build environment setup and the make instructions. Added links to the Newbs Guide.
* CTRL LED scan code mapping fix
Fixed scan codes to properly align with key wiring
* Update scan codes for caps and scroll lock lighting
Update scan codes for caps and scroll lock lighting according to previous scan code mapping update
* Added new Marianas keymap for DZ60
* Included suggestions to remove unnecessary line regarding MODS_CTRL_MASK, and added names for layers.
Added enum to define names for layers, and removed unused #DEFINE
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* Add readme to Lukaus' Ergodox EZ keymap
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* Add readme to Lukaus' Ergodox EZ keymap
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Fix merge conflict again?
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* Add readme to Lukaus' Ergodox EZ keymap
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* update keymap
* Update rules.mk to remove redundant commented line
* Fix missing key on default layout for IBM Model M 122 key
* Fix issues identified by drashna and noroadsleft
* Update readme for IBM 122 key
* Add am keymap
* Add configuration to play nice with stuck modifiers
This is in particular useful with emacs since its easy to get ctrl stuck
* Deactivate mouse keys and backlight
* Add control/esc and shift/enter taps
* Remove DVORAK and PLOVER
I won't be using this soon, so getting some free space
* Raiser and Lower ideas from jeebak
* Add cursor and mouse layers
* Enable mouse keys
* Switch underscore with minus
* Disable audio and fix warnings
* Update to the upstream changes
* VIM line motion symbols on the raise layer
* Enable sound and freeup some media keys on layers
* Fix whitespace on keymap
* Code review changes
* Improve keymap documentation
* Improve keymap to match to the default one
* Restore DEFAULT_FOLDER to the default value
* Fix config.h unescaped line
Added support to enter bootloader from software (bootloader version must be newer than "v2.18Jun 22 2018 17:28:08" until workaround for older is created).
Updated CTRL and ALT keymaps for entering bootloader with Fn+b held for >500ms.
Added basic MacOS keymap for ALT.
USB sleep LED indicator now turns off after 1 second.
Slowed down debug LED code printing.
* mitosis:datagrok: fix typo'd inconsistent brace arrangement
(thank you @cari66ean)
* mitosis:datagrok: add makefile argument MITOSIS_DATAGROK_SLOWUART
* mitosis:datagrok: return backspace to opposite space, use TT(), more
- move backspace back to its position opposite space
- move del to red+backspace
- move tab back to tap-leftshift
- move printscreen/scrolllock/pause to blue+left pinky column
- use TT() instead of MO() to stick a layer on if wanted
- indentation that my text editor wants
- default to no audio; i can enable it at compile time.
* mitosis:datagrok: modularize features, add default layer rotator key
* mitosis: add MITOSIS_DATAGROK_BOTTOMSPACE makefile argument
* mitosis:datagrok: README improvements; document new features
* mitosis:datagrok: dot. not "number pad dot." in numbers layer
* mitosis:datagrok remove unnecessary _user audio code
* mitosis:datagrok: return to MO() for red/blue, keep TT() for purple
in this way, the LED still updates quickly when red or blue is pressed,
but we can still lock the purple layer on for 10-key numpad operation
with red+tapping blue.
* mitosis:datagrok: add colemak and dvorak default layers
* mitosis:datagrok update readme re: available default layouts
* mitosis: remove unneeded code that was overriding led_set_user
also, add some comments
* mitosis:datagrok: updated led setting code for new layers
also, place into led_set_user where it belongs, not matrix_scan_user.
* mitosis:datagrok: update LEDs when setting the default layer
maybe this should go into default_layer_set?
* mitosis:datagrok update readme with new imgur links + other improvements
* mitosis:datagrok fix typo in image urls
* mitosis:datagrok remove useless #include (ty @drashna)
* mitosis:datagrok undo unnecessary change to quantum/quantum.h
i can put the extern float definition in my own keymap code. (ty @drashna)
* mitosis:datagrok move customized layout to my keymap
no need to modify keyboard-level mitosis.h. (ty @drashna)
* mitosis:datagrok update comment describing my led indicator logic
* datagrok:mitosis update readme to document LED indicator.
* swap KC_LALT with KC_LGUI
* replace KC_RALT with KC_RGUI
This makes the keyboard more mac friendly out of the box (I'm aware this
that this could partially be done in software with the preferences but
hey, where's the fun in that).
* fixing ortho_4x12 configs
* Using upstream/master version instead
* Additions and Corrections
Corrected the Kinesis/Stapelberg's .c file to allow LEDs to work
Removed excess cruft from my Kinesis keymap to reflect this change
Other minor tweaks and adjustments to my ortho_4x12 and 5x12 layouts
* Rules for vitamins_included
Added a section to disable RGB underglow for the Let's Split
Vitamins Included board.
* fixing ortho_4x12 configs
* Using upstream/master version instead
* Additions and Corrections
Corrected the Kinesis/Stapelberg's .c file to allow LEDs to work
Removed excess cruft from my Kinesis keymap to reflect this change
Other minor tweaks and adjustments to my ortho_4x12 and 5x12 layouts
* Creating my own userspace
* Added Rorschach keymap
* renamed userspace folder
I renamed my userspace folder since I'm not ready to start using
it just yet, and I want to get my keyboards programmed. This is
a temporary thing and will be fixed later as I get time.
* adding files in "new" folder
* Disabling LEDs on Pro Micro
* Modifications to Kinesis keymap
* More kinesis tweaks
* removed userspace from master
Created a new branch for my userspace stuff. I'll work on it there.
* Moved keymap to separate branch
Moved the Rorschach keymap I was working on to a separate branch
for development purposes. Not ready to push it up to upstream
master.
* pulling in diverge tm2 from staging branch
* cleaned up comments, docs, licenses
* refactored apparent grid to make 2u spacebars more obvious
* various delinting from noroadsleft review
* most of drashna's feedback responded to
- lots of lint swept
- used more modern tri-layer functions
- still need to adopt modern split support.
* switch to common split code. remove comment cruft
* tapping force hold makes LT way more usable for rapid , sequences
* improvement of crkbd communication functions (based on helix-keyboard)
* Removed unnecessary code.
* Changed read restriction from #define to #pragma once.
* Changed from sizeof to defined size.
* moved lib folder to crkbdroot.
removed warning of ws2812.d
* - Fixed DK60 version in config.h
* - Updated dk60 readme with new QMK rules
* - Fixed wording in readme
* Added dbroqua layout for DZ60
I've also updated dz60.h to add "true HHKD" keymap definition (6U
spacebar).
With the default HHKB definition r_alt was not mapped and when I pressed
r_menu it was r_alt.
Regards
* Updated dbroqua layout for HHKB keyboard
Added default configuration and alternate (swap gui/alt keys).
Save user choice in keyboard memory (like plank, thanks for this
feature!).
* Added dbroqua layout for Iris keyboard
* Updated layout and fixed includes
* Added personal layout for FC660C
* Add support for my Falbatech Atreus
This is currently the default Atreus keyboard layout, but I will
eventually customize it to match my Ergodox layout.
* Address review comments
* More review comments fixed
* More review comments fixed
Renamed keyboard alt67 to alt and adjusted necessary files where alt67 appeared.
CTRL keymap fixed enum structure name.
usb2422 removed stray define no longer used.
* new mode for v60
xtonhasvim. still working on it:
- need to get indicator lights going
- and fun layer properly fleshed out.
* status lighting, proper fun layer
copied fun layout from keycaps to maximize accessibility
* enable power return
* support brightness adjustment for indicators
* refined brightness setting.
is saved in eeprom now
* readme. and fixed tilde
* more modifiers fall through fun layer
* i mean, this kinda works..
* much more reliable way of restoring lights
* responded to feedback
* various edits and minor additions
* updates
* updates
* updates
* lets_split LEDs off instructions
* lets_split LEDs off instructions
* turn off lets_split LEDs in userspace
* one-hand setup for right side
* Massdrop keyboards readme update
Massdrop keyboards readme update for flashing instructions
* ctrl and alt keyboard readme update
Updating make command in Massdrop CTRL and ALT keyboard readme files to reflect directory change
This is the simplest, most efficient way I could come up with to silence
the "Failed to start write 60" error that occurs when QMK tries to talk
to a screen that doesn't exist.
iota_gfx_init passes a success boolean. We catch that into a global bool
(we could rewrite multiple functions to pass this as an argument, but
given the number of keyboards using this code it seemed less disruptive
this way) and then use that as a conditional on running the
iota_gfx_task in matrix_scan_user.
Tl;dr: if the screen doesn't init, the screen write code doesn't run.
* Massdrop SAMD51
Massdrop SAMD51 keyboards initial project upload
* Removing relocated files
Removing files that were relocated and not deleted from previous location
* LED queue fix and cleaning
Cleaned some white space or comments.
Fix for LED I2C command queue.
Cleaned up interrupts.
Added debug function for printing numbers to scope through m15 line.
* Factory programmed serial usage
Ability to use factory programmed serial in hub and keyboard usb descriptors
* USB serial number and bugfix
Added support for factory programmed serial and usage.
Incorporated bootloader's conditional compiling to align project closer.
Fixed issue when USB device attempted to send before enabled.
General white space and comment cleanup.
* Project cleanup
Cleaned up project in terms of white space, commented code, and unecessary files.
NKRO keyboard is now using correct setreport although KBD was fine to use.
Fixed broken linkage to __xprintf for serial debug statements.
* Fix for extra keys
Fixed possible USB hang on extra keys report set missing
* I2C cleanup
I2C cleanup and file renames necessary for master branch merge
* Boot tracing and clocks cleanup
Added optional boot debug trace mode through debug LED codes.
General clock code cleanup.
* Relocate ARM/Atmel headers
Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes.
* Pull request changes
Pull request changes
* Keymap and compile flag fix
Keymap fix for momentary layer.
Potential compile flag fix for Travis CI failure.
* va_list include fix
Fix for va_list compile failure
* Include file case fixes
Fixes for include files with incorrect case
* ctrl and alt67 keyboard readme
Added ctrl and alt67 keyboard readme files
* Add german layout for redox keyboard
A german layout for the redox keyboard which tries
to stay close to the default english redox layout
while acommodating the umlauts at their usual position.
* Fix keycodes in german redox keymap
The keycode for Y was wrong.
* Minor changes
* Remove #ifdef include guard by #pragma once
* Remove unnecessary include from rules.mk
* Review changes
Remove unnecessary code fragments that
were pointed out in the review
of PR #3695 by @drashna.
* Adding the AT101 PCB firmware
* Fixed AT101 keymap error
* Fixing AT101 firmware
* More Fixes for AT101 firmware
* Rename AT101_Blackheart.c to at101_blackheart.c
* Rename AT101_Blackheart.h to at101_blackheart.h
* Update readme.md
* Renaming AT101 folder pt1
* Renaming AT101 folder pt2
* Fixing AT101 LED function name
* Redoing AT101 folder naming pt2
Last round had issues, should be the last rename.
* Fixing missing comma in at101_blackheart.h
* Make tap function inline
* Use better makefile keyboard detection
* Remove Copy-Paste macro
* Add F11/F12 to Iris
* Minor tweaks to userspace config
* Set audio clicky randomness to 1.5
* Set NO_DEBUG to only be set if console is not enabled
* Move NO_MUSIC_MODE to userspace config.h
* Reduce Ergodox Debounce
* Add Planck Light config
* Use OSM for ortho 4x12
* Music Mode changes for planck light
* Cleanup do to shutdown user and other fixes in Master
* Add and use 'shutdown_user' fzunction
* Remove global NO_MUSIC_MODE define
* Add NO_MUSIC_MODE to individual keymaps
* Change layer colors
* Remove NO_PRINT and NO_DEBUG from userspace config.h
Since these are automatically disabled if the console isn't enabled.
* Remove backlight code if backlight isn't enabled
* Remove Twinkle from Ergodox
* Disable RGB twinkling and enable PSM
* Clean up RGB matrix code
* Clean up planck light indicators
* Clean up tap code
* Rules cleanup for ortho 4x12
* Fix up userspace template
* Revert "Clean up tap code"
This reverts commit 09f64d6d67aa021c3b5ac86a9a739a5ca2b9c1ec.
* Organize includes
* userspace cleanup
* Fix modifier spelling error
* Fix userspace rules
* Disable Permissive Hold again
* Minor clean up
* Fix Tap stuff
* Viterbi Updates for file size
* fixed arrow keys and left control
* added right shift
* latest version
* reverted arrow keys
* edited readme
* added osu layer
* updated osu layout
* updated osu layout
* added full arrow keys to osu layout
* in case i mess up creating macros
* added the best meme key in the world
* added plover steno layer
* updated boy314 layout
* removed unused layers
* added boy314 xd75 layout, inspired by preonic layout
* added boy314 xd75 layout, inspired by preonic layout
* version 2 of boy314's xd75 layout
* added readme notes
* updated readme for boy314 xd75 layout
* qwerty support, brackets on bottom row, caps lock underglow
* fixed readme/
* small changes to allow merging
* minor changes to format
* fixed up default readme
* Keyboard: HandWired/XeaL60
* Updated rules.mk
* Mapping for layout was flipped
* Figured out how to re-map bad pins.
* Updated Keymap
* Enabled audio, Forced NKRO
* Added QMK_KEYS_PER_SCAN
* Removed more unnecessary files, since split_keyboards are in main QMK branch already.
* Simplified rules.mk in rev1
* Removed i2c from matrix.c
* Re-formatted to 4 spaces per tab,
* Changed note for NUMPAD
* Added I2C support back!
* Fixed keyboard mappings. Both sides work
* Moved i2c configuration from keymaps/default/config.h to config.h
* Changed SCL_CLOCK to 400000L
* Added DEBUG_MATRIX_SCAN_RATE for future optimization efforts
* Removed row2col code to clean up matrix.c
* Scan rate from 2100 -> 4200 by using Nop instead of waiting 30us between columns.
* Further optimized column reading via optimized_col_reader.
* Immediate key-recognition
* Switched back to own implementation of SPLIT_KEYBOARD. Will optimize so that slave interrupts master.
* Moved scanrate debug messages to another file.
* Made matrix_scanrate.c compile if CONSOLE_ENABLE is off. Updated to latest i2c.c
* Latest i2c uses a few bytes for lighting information
* Optimizations in i2c.h to determine buffer size.
* Disabled a whole bunch of features. TODO: Test that keyboard still works fine.
* Minimum #define NO_ACTION's with still working keyboard
* Fixed matrix not working due to offsets not being respected
* Added numlock button for keymap.
* Use I2C_KEYMAP_START offset
* Removed serial, Backlight and RGB support
* Removed need for split_flags.
* Added audio on and off for numlock.
* Renamed from xeal60 to xealous, simplified build system.
* Used more shared split_common code.
* Updated audio code.
* moved tone_qwerty and tone_numpad to config.h. Removed keymaps/default/config.h
* Added more shortcut keys in _FN layer. Increased debounce to 6ms due to fencepost error.
* DF used with incorrect argument. Custom_keycodes no longer required.
* Fixed bug in update_debounce_counters which was resulting in no debouncing!
* Removed unnecessary #include
This small change prevents an unused variable from being initialized, throwing a warning during compilation, thus ending fatally.
[07:47:10] [Daniels-MacBook-Pro-3] [dburkhol] [ /Users/dburkhol/git/qmk_firmware ] [develop ]
: make handwired/dactyl:default
QMK Firmware 0.6.97
Making handwired/dactyl with keymap default
avr-gcc (GCC) 7.3.0
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Size before:
text data bss dec hex filename
0 19972 0 19972 4e04 .build/handwired_dactyl_default.hex
Compiling: keyboards/handwired/dactyl/twimaster.c [OK]
Compiling: keyboards/handwired/dactyl/matrix.c keyboards/handwired/dactyl/matrix.c:52:22: error: 'expander_col_pins' defined but not used [-Werror=unused-const-variable=]
static const uint8_t expander_col_pins[MATRIX_COLS] = MATRIX_EXPANDER_COL_PINS;
^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
[ERRORS]
|
|
|
make[1]: *** [.build/obj_handwired_dactyl_default/matrix.o] Error 1
make: *** [handwired/dactyl:default] Error 1
Make finished with errors
* Move octagon directory into duck diretory and fix as many compile issues as I can
* fix formatting
* fix layout75 matrix
* edit readme for build instructions
* Bocaj Layout Revamp
* Pull in Upstream (#1)
* Various tweaks for some Input:Club build processes
* change KEYMAP to LAYOUT for all new keyboards made using this script
* Add support for rev3 of the Atom47 (#2672)
* Added support for rev3 of the Atom47
* Updated Atom47 readme's
* Fix redefine error on rev2 and add maartenwut's keymap
* Fix redefine error on LEdiodes keymap
* Add Nyquist keymap (#2692)
* nyquist
* danielhklein nyquist setup
* shift left controls
* remove readme
* cleanup before pr
* ready for pr
* Adds Phantom TKL support (#2696)
* Add an info.json to phantom keyboard
* Add layouts
- KEYMAP_WINKEYLESS
- KEYMAP_7BIT
- KEYMAP_ISO
- KEYMAP_ISO_WINKEYLESS
* Add key_counts
* Add 2 missing F-Row keys
* Add TKC1800 info.json
Created an info.json for the tkc1800.
* Clueboard 60 info.json
- adds
- LAYOUT_60_ansi
- LAYOUT_60_iso
- KEYMAP_AEK
- KEYMAP
- LAYOUT_60_ansi_split_bs_rshift
* Add the Speedo keyboard
* Fix KC60 info.json file (#2707)
* change KEYMAP to LAYOUT in all the KC60 files
* Redo the info.json file
* Small fixes to TKC1800
- adjust F-row to use 0.25 spacing
- split left shift
- add key_count
* Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708)
* change diverge 3 KC_KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for handwired arrow pad
* change M10A to LAYOUT for m10-a
* Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68
* change KC_KEYMAP to LAYOUT for nano
* Refactor to LAYOUT
* refactor to LAYOUT-ansi and LAYOUT_iso for s65
* LAYOUT conversions for lfkkeyboards
* missed a few renames
* mini1800 for lfkeyobards support of LAYOUT
* Improve state/chord handling and clean up namespace
Some values that can never, ever, change were held in local
variables, rather than in PROGMEM. Fixed.
Change "pressed" to a signed int so the test for < 0 makes
sense, and to avoid possible weird failure modes in the
case where a key release comes in when pressed is already
zero. (Shouldn't happen, sure, but computers are weird.)
A lot of things in process_steno had external linkage for no
particular reason. They've been marked static. Stuff still
builds.
Distinguish between currently-held keys and keys that have
been held, and expose these values through a nicely-named API
so other code could, say, check on the current set of steno
chording in order to make displays. Also in passing fix up the
"state" value having external linkage so it could clash with
other people's variable declarations.
The API also provides hooks for key processing and steno chord
events, so you can monitor those events without having to
run in matrix_scan_user and recheck the values directly. Also
document these.
There is no path through processing a key that doesn't
end with a return false, so the nested return foo() are
gone and we just return false.
* Pull information from config.h and rules.mk (#2711)
* Pull information from config.h and rules.mk
* Readd the kbd75 maintainer
* Remove obsolete info.json entries (#2712)
* Clean up some long-standing errors when populating the API (#2715)
* More Configurator Warning Fixes (#2716)
* mf68_ble did not have the correct .c and .h files
* Fix JC65 KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for s60_x
* Convert KEYMAP to LAYOUT for lets_split boards
* Convert KEYMAP to LAYOUT
* more fixes to keymap for iris
* convert KEYMAP to LAYOUT for levinson keyboard
* change losinggeneration's KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for nyquist
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for viterbi
* convert KEYMAP to LAYOUT
* convert KEYMAP and its subsidiries to the LAYOUT standard
* convert KEYMAP and its subsidiries to the new LAYOUT standard
* Normacos keymap for let's split keyboard (#2691)
* Cheers let's split keymap
* fixed typo on norman layer of cheers keymap for let's split
* fixed right handed mappings for home row
* cheers keymap for let's split redefinition
* updated Cheers keymap for let's split
* cheers keymap for let's split updated with some terminal macros
* renamed cheers let's split keymap to a more appropriate normacos
* updated normacos keymap doc / removed non functional keys
* reset let's split rules to default values
* added more spotlight search macros
* normalized keymap comments
* Moved numpad on lower layer
* hhkb jp personal keymap (#2698)
* Add JJ40 Cockpit personal keymap (#2713)
* Add JJ40 Cockpit keymap
* Fix lower layer symbols
* Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718)
* add readme to ktype keyboard
* add readme to m10a
* add readme to mini1800
* add readme to parent directory
* Revert "Pull in Upstream (#1)"
This reverts commit eeba0cec17ccb636e4225eed88aeae72b99f5e45.
* Updates to Bocaj Files
- Gave up on Tap Dance for ' -> '
+ Added another 'Secret'
+ Add ' -> ' to the Swap Hands key
+ Add Swap Hands to the ' -> ' key
+ Made Hand Swapping a momentary toggle
- Removed Auto Shift
+ Added Layer Toggle to KC_QUOTE for the _TOOLS layer
- Disabled Tap Dance
* Merge remote-tracking branch 'upstream/master'
* Updates to Bocaj
Added Game Layers, Removed Unused Macros
* Removed 'secrets.h'
* Updates to Bocaj
Remove 'secrets'.
Remove 'sendstring_workman.h' and set related layer back to qwerty due to macro compatibility issues
* Total revisioning of keymap and layout structure
* Missed readme.md file
* Bocaj - Permissive Hold setting enabled
* Switching from ErgoDox EZ centric configuration to the layout/user approach
* Bocaj - Create Userspace and Ergodox layout
* Update settings.json
* Adding my personal planck keymap
* Adding readme.md to my keymap
* Create my userspace
add users/ishtob/
* Moved macros off keymap
macros now exsists in my userspace, moved them off keyboard specific keymaps
* Create my userspace
add users/ishtob/
* rebase from main QMK repo
* fixed compile error with planck rev6 keymap
* fixed compile error with planck rev6 keymap
* Revert "Merge branch 'master' of https://github.com/ishtob/qmk_firmware"
This reverts commit 6c8a9a6eec7ec311802338ea361099612182465d, reversing
changes made to 5c598d9a53a7f794d5be283ac40ca97631ae5578.
* fixed issue where compile errors if private macro file is not present
* Revert "fixed issue where compile errors if private macro file is not present"
This reverts commit e0035df48ffb9a95aa94e8339c58ef539e0449cf.
* Fixed STM32 timer issue with Planck Rev6 with tap mods
* Revert "fixed compile error with planck rev6 keymap"
This reverts commit 5c598d9a53a7f794d5be283ac40ca97631ae5578.
* Revert "Revert "fixed compile error with planck rev6 keymap""
This reverts commit c36896ca718f8b9bb3c653d7532797e9129477e3.
* Fixed compile issues with my personal userspace and keymap utilizing the userspace
* Initial Commit
Port from xauser's jetfire code. Does not compile yet
* fix up keymap from uint8 to uin16
* update rules file to contain custom matrix
* Good stopping point
Still lots of compile errors but I'm getting there.
* fix a few more compile errors
* move a few functions around to help with compiling
* Finally got it all to compile
* Get rid of that old KEYMAP macro
* edit readme
* Put my name everywhere and some minor code clean ups
* start to remove that kc nonsense
* fix keymap compilation issues
* add reset key info
* better human readable formatting
* match the duck default layout
* add confgurator support
* clarify reset key
* might be a good idea to use the correct pin
* get the riight keycode for RGB
* include an ALL layout
* I tried to fix the formatting....sigh
* add functons to ensure Configurator compile-ability
* move jetfire to duck directory
* Moved and renamed things as per Drashna's PR comments as his back was hurting as he reviewed this
