182 lines
6.4 KiB
Makefile
182 lines
6.4 KiB
Makefile
# Hey Emacs, this is a -*- makefile -*-
|
|
##############################################################################
|
|
# Compiler settings
|
|
#
|
|
CC = avr-gcc
|
|
OBJCOPY = avr-objcopy
|
|
OBJDUMP = avr-objdump
|
|
SIZE = avr-size
|
|
AR = avr-ar
|
|
NM = avr-nm
|
|
HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature
|
|
EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT)
|
|
BIN =
|
|
|
|
COMMON_VPATH += $(DRIVER_PATH)/avr
|
|
|
|
COMPILEFLAGS += -funsigned-char
|
|
COMPILEFLAGS += -funsigned-bitfields
|
|
COMPILEFLAGS += -ffunction-sections
|
|
COMPILEFLAGS += -fdata-sections
|
|
COMPILEFLAGS += -fpack-struct
|
|
COMPILEFLAGS += -fshort-enums
|
|
|
|
ASFLAGS += $(AVR_ASFLAGS)
|
|
|
|
CFLAGS += $(COMPILEFLAGS) $(AVR_CFLAGS)
|
|
CFLAGS += -fno-inline-small-functions
|
|
CFLAGS += -fno-strict-aliasing
|
|
|
|
CXXFLAGS += $(COMPILEFLAGS)
|
|
CXXFLAGS += -fno-exceptions -std=c++11
|
|
|
|
LDFLAGS +=-Wl,--gc-sections
|
|
|
|
OPT_DEFS += -DF_CPU=$(F_CPU)UL
|
|
|
|
MCUFLAGS = -mmcu=$(MCU)
|
|
|
|
# List any extra directories to look for libraries here.
|
|
# Each directory must be seperated by a space.
|
|
# Use forward slashes for directory separators.
|
|
# For a directory that has spaces, enclose it in quotes.
|
|
EXTRALIBDIRS =
|
|
|
|
|
|
#---------------- External Memory Options ----------------
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# used for variables (.data/.bss) and heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# only used for heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
EXTMEMOPTS =
|
|
|
|
#---------------- Debugging Options ----------------
|
|
|
|
# Debugging format.
|
|
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
|
# AVR Studio 4.10 requires dwarf-2.
|
|
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
|
DEBUG = dwarf-2
|
|
|
|
# For simulavr only - target MCU frequency.
|
|
DEBUG_MFREQ = $(F_CPU)
|
|
|
|
# Set the DEBUG_UI to either gdb or insight.
|
|
# DEBUG_UI = gdb
|
|
DEBUG_UI = insight
|
|
|
|
# Set the debugging back-end to either avarice, simulavr.
|
|
DEBUG_BACKEND = avarice
|
|
#DEBUG_BACKEND = simulavr
|
|
|
|
# GDB Init Filename.
|
|
GDBINIT_FILE = __avr_gdbinit
|
|
|
|
# When using avarice settings for the JTAG
|
|
JTAG_DEV = /dev/com1
|
|
|
|
# Debugging port used to communicate between GDB / avarice / simulavr.
|
|
DEBUG_PORT = 4242
|
|
|
|
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
|
# just set to localhost unless doing some sort of crazy debugging when
|
|
# avarice is running on a different computer.
|
|
DEBUG_HOST = localhost
|
|
|
|
#============================================================================
|
|
|
|
# Convert hex to bin.
|
|
bin: $(BUILD_DIR)/$(TARGET).hex
|
|
ifeq ($(BOOTLOADER),lufa-ms)
|
|
$(eval BIN_PADDING=$(shell n=`expr 32768 - $(BOOTLOADER_SIZE)` && echo $$(($$n)) || echo 0))
|
|
$(OBJCOPY) -Iihex -Obinary $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin --pad-to $(BIN_PADDING)
|
|
else
|
|
$(OBJCOPY) -Iihex -Obinary $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
|
|
endif
|
|
$(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;
|
|
|
|
# copy bin to FLASH.bin
|
|
flashbin: bin
|
|
$(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin;
|
|
|
|
# Generate avr-gdb config/init file which does the following:
|
|
# define the reset signal, load the target file, connect to target, and set
|
|
# a breakpoint at main().
|
|
gdb-config:
|
|
@$(REMOVE) $(GDBINIT_FILE)
|
|
@echo define reset >> $(GDBINIT_FILE)
|
|
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
|
@echo end >> $(GDBINIT_FILE)
|
|
@echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
|
|
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
|
ifeq ($(DEBUG_BACKEND),simulavr)
|
|
@echo load >> $(GDBINIT_FILE)
|
|
endif
|
|
@echo break main >> $(GDBINIT_FILE)
|
|
|
|
debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
|
|
ifeq ($(DEBUG_BACKEND), avarice)
|
|
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
|
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
|
$(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
|
@$(WINSHELL) /c pause
|
|
|
|
else
|
|
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
|
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
|
endif
|
|
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
|
|
|
|
|
|
|
|
|
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
|
COFFCONVERT = $(OBJCOPY) --debugging
|
|
COFFCONVERT += --change-section-address .data-0x800000
|
|
COFFCONVERT += --change-section-address .bss-0x800000
|
|
COFFCONVERT += --change-section-address .noinit-0x800000
|
|
COFFCONVERT += --change-section-address .eeprom-0x810000
|
|
|
|
|
|
|
|
coff: $(BUILD_DIR)/$(TARGET).elf
|
|
@$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
|
|
$(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
|
|
|
|
|
|
extcoff: $(BUILD_DIR)/$(TARGET).elf
|
|
@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
|
|
$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
|
|
|
|
ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
|
|
QMK_BOOTLOADER_TYPE = DFU
|
|
else ifeq ($(strip $(BOOTLOADER)), qmk-hid)
|
|
QMK_BOOTLOADER_TYPE = HID
|
|
endif
|
|
|
|
bootloader:
|
|
ifeq ($(strip $(QMK_BOOTLOADER_TYPE)),)
|
|
$(error Please set BOOTLOADER to "qmk-dfu" or "qmk-hid" first!)
|
|
else
|
|
make -C lib/lufa/Bootloaders/$(QMK_BOOTLOADER_TYPE)/ clean
|
|
$(QMK_BIN) generate-dfu-header --quiet --keyboard $(KEYBOARD) --output lib/lufa/Bootloaders/$(QMK_BOOTLOADER_TYPE)/Keyboard.h
|
|
$(eval MAX_SIZE=$(shell n=`$(CC) -E -mmcu=$(MCU) -D__ASSEMBLER__ $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | sed -ne 's/\r//;/^#/n;/^AVR_SIZE:/,$${s/^AVR_SIZE: //;p;}'` && echo $$(($$n)) || echo 0))
|
|
$(eval PROGRAM_SIZE_KB=$(shell n=`expr $(MAX_SIZE) / 1024` && echo $$(($$n)) || echo 0))
|
|
$(eval BOOT_SECTION_SIZE_KB=$(shell n=`expr $(BOOTLOADER_SIZE) / 1024` && echo $$(($$n)) || echo 0))
|
|
$(eval FLASH_SIZE_KB=$(shell n=`expr $(PROGRAM_SIZE_KB) + $(BOOT_SECTION_SIZE_KB)` && echo $$(($$n)) || echo 0))
|
|
make -C lib/lufa/Bootloaders/$(QMK_BOOTLOADER_TYPE)/ MCU=$(MCU) ARCH=$(ARCH) F_CPU=$(F_CPU) FLASH_SIZE_KB=$(FLASH_SIZE_KB) BOOT_SECTION_SIZE_KB=$(BOOT_SECTION_SIZE_KB)
|
|
printf "Bootloader$(QMK_BOOTLOADER_TYPE).hex copied to $(TARGET)_bootloader.hex\n"
|
|
cp lib/lufa/Bootloaders/$(QMK_BOOTLOADER_TYPE)/Bootloader$(QMK_BOOTLOADER_TYPE).hex $(TARGET)_bootloader.hex
|
|
endif
|
|
|
|
production: $(BUILD_DIR)/$(TARGET).hex bootloader cpfirmware
|
|
@cat $(BUILD_DIR)/$(TARGET).hex | awk '/^:00000001FF/ == 0' > $(TARGET)_production.hex
|
|
@cat $(TARGET)_bootloader.hex >> $(TARGET)_production.hex
|
|
echo "File sizes:"
|
|
$(SIZE) $(TARGET).hex $(TARGET)_bootloader.hex $(TARGET)_production.hex
|