History

Ryan ebb512db82 Debounce defines cleanup (#19742 ) * Clean up `DEBOUNCE` in config.h, 0-9 * Clean up `DEBOUNCE` in config.h, A * Clean up `DEBOUNCE` in config.h, B * Clean up `DEBOUNCE` in config.h, C * Clean up `DEBOUNCE` in config.h, D * Clean up `DEBOUNCE` in config.h, E * Clean up `DEBOUNCE` in config.h, F * Clean up `DEBOUNCE` in config.h, G * Clean up `DEBOUNCE` in config.h, H * Clean up `DEBOUNCE` in config.h, handwired * Clean up `DEBOUNCE` in config.h, I * Clean up `DEBOUNCE` in config.h, J * Clean up `DEBOUNCE` in config.h, K * Clean up `DEBOUNCE` in config.h, L * Clean up `DEBOUNCE` in config.h, M * Clean up `DEBOUNCE` in config.h, N * Clean up `DEBOUNCE` in config.h, O * Clean up `DEBOUNCE` in config.h, P * Clean up `DEBOUNCE` in config.h, Q * Clean up `DEBOUNCE` in config.h, R * Clean up `DEBOUNCE` in config.h, S * Clean up `DEBOUNCE` in config.h, T * Clean up `DEBOUNCE` in config.h, U * Clean up `DEBOUNCE` in config.h, V * Clean up `DEBOUNCE` in config.h, W * Clean up `DEBOUNCE` in config.h, X * Clean up `DEBOUNCE` in config.h, Y * Clean up `DEBOUNCE` in config.h, Z * Remove default debounce from info.json * Migrate non-default debounce to info.json		2023-02-03 19:19:58 +00:00
..
keymaps	Remove legacy Grave Escape keycodes (#18787 )	2022-10-20 18:04:11 -07:00
templates	Use a macro to compute the size of arrays at compile time (#18044 )	2022-08-30 10:20:04 +02:00
config.h	Debounce defines cleanup (#19742 )	2023-02-03 19:19:58 +00:00
info.json
mxss_frontled.c	Use a macro to compute the size of arrays at compile time (#18044 )	2022-08-30 10:20:04 +02:00
mxss_frontled.h
mxss.c
mxss.h
readme.md
rgblight.c
rules.mk

readme.md

MxSS - Polycarb 65% Kit for MX/SMK

Important Note:

This PCB supports the VIA configurator, and this is the recommended way to configure the keymap on this keyboard. Building the firmware should only be necessary if you would like to change the colours of the front LEDs in indicator mode.

For more information about the VIA configurator, see here.

Information:

Case: Frosted Polycarbonate, CNC milled
Plate: Brass, mirror-finished and electroplated
Weight: Same as plate
PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish

Details:

2.9 degrees angle on the case
Top mount plate
Center USB, Type-B Mini
MX and SMK (White and Orange) switch support
Holtite support
RGB underglow
1.5kg with plate and weight

Keyboard Maintainer: MxBlue

Hardware Supported: Custom PCB, ATMega32u4

Hardware Availability: https://geekhack.org/index.php?topic=94986.0

Make example for this keyboard (after setting up your build environment):

make mxss:default

See build environment setup then the make instructions for more information.

Front LED Operation

The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes.

There are 3 modes of operation:

FLED_OFF - Front LEDs stay off
FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request)
FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer

Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example).

Custom Keycodes

FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI)
FLED_VAI - Increase front LED brightness
FLED_VAD - Decrease front LED brightness

Further Notes

As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.