locker98/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
b39285807e
qmk_firmware/keyboards/vitamins_included
History
James Young 04bf30aad8
Migrate LOCKING_*_ENABLE to Data-Driven: U-V (#23786) 
Affects:

  - `uk78`
  - `ungodly/nines`
  - `unikeyboard/diverge3`
  - `unikeyboard/divergetm2`
  - `unikeyboard/felix`
  - `uranuma`
  - `utd80`
  - `v60_type_r`
  - `vagrant_10`
  - `viendi8l`
  - `viktus/at101_bh`
  - `viktus/omnikey_bh`
  - `viktus/smolka`
  - `viktus/sp111`
  - `viktus/styrka`
  - `viktus/z150_bh`
  - `vitamins_included/rev1`
2024-05-23 19:40:41 +01:00
..
keymaps Adjust keycode alignment around QK_BOOT (#23697) 2024-05-11 16:50:48 +01:00
rev1 Migrate LOCKING_*_ENABLE to Data-Driven: U-V (#23786) 2024-05-23 19:40:41 +01:00
rev2 Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
info.json Migrate features and LTO from rules.mk to data driven (#23307) 2024-03-30 10:57:30 +00:00
readme.md
rules.mk Migrate features and LTO from rules.mk to data driven (#23307) 2024-03-30 10:57:30 +00:00
vitamins_included.c

readme.md

Let's Split Vitamins Included

Let's Split Vitamins included, assmebled in 3D printed case

This readme and most of the code are from the lets split readme

Quick links

REV1
REV2

Hardware

Hardware files for the Let's Split vitamins included are stored here

Features

Some features supported by the firmware:

  • Either half can connect to the computer via USB, or both halves can be used independently.
  • Optional support for I2C connection between the two halves if for some reason you require a faster connection between the two halves. Note that this requires 4 conductors between halves, and as such requires a TRRS cable.

Required Hardware

Amount Description
1 PCB kit from novelkeys
48 MX compatible switches
48 1U keycaps
1 Mini-usb-B cable or USB-C cable for rev2. Keep in mind rev2.0 doesn't work with USB-C <> USB-C cables
1 TRS / TRRS cable

Optional Hardware

A speaker can be hooked-up to the footprint on the PCBs. It is already enabled in the default firmware.

WS2812 LEDs can be added to the board. Check the different revision readme for specifics.

Using I2C

On the left half PCB, there's two pads labled I2C Pullup if you want to use I2C, you need to bridge those two solder jumpers with a soldering iron.

You can change your configuration between serial and i2c by modifying your config.h file.