locker98/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
99501ddae4
qmk_firmware/keyboards/takashicompany/center_enter
History
James Young 912124f71c
Migrate LOCKING_*_ENABLE to Data-Driven: T (#23785) 
Affects:

  - `takashicompany/center_enter`
  - `takashicompany/endzone34`
  - `takashicompany/qoolee`
  - `takashicompany/radialex`
  - `takashiski/namecard2x4/rev1`
  - `takashiski/namecard2x4/rev2`
  - `takashiski/otaku_split/rev0`
  - `takashiski/otaku_split/rev1`
  - `taleguers/taleguers75`
  - `tanuki`
  - `team0110/p1800fl`
  - `technika`
  - `tenki`
  - `tetris`
  - `tg4x`
  - `the_royal/liminal`
  - `the_royal/schwann`
  - `thevankeyboards/bananasplit`
  - `thevankeyboards/caravan`
  - `thevankeyboards/jetvan`
  - `thevankeyboards/minivan`
  - `thevankeyboards/roadkit`
  - `tkc/california`
  - `tkc/m0lly`
  - `tkc/tkc1800`
  - `tkc/tkl_ab87`
  - `tkw/stoutgat/v2`
  - `tmo50`
  - `toad`
  - `toffee_studio/blueberry`
  - `tokyokeyboard/alix40`
  - `tokyokeyboard/tokyo60`
  - `tominabox1/adalyn`
  - `tominabox1/le_chiffre`
  - `tominabox1/qaz`
  - `tr60w`
  - `treasure/type9`
  - `tszaboo/ortho4exent`
2024-05-23 19:48:32 +01:00
..
keymaps Remove legacy international keycodes (#18588) 2022-10-09 14:51:09 +11:00
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: T (#23785) 2024-05-23 19:48:32 +01:00
readme.md

readme.md

Center x Enter

image

A 30% keyboard with the enter key placed in the center. Option to install a rotary encoder is also available. VIA (Remap) is also supported.

Make example for this keyboard (after setting up your build environment):

make takashicompany/center_enter:default

Flashing example for this keyboard:

make takashicompany/center_enter:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available