locker98/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5d6d959421
qmk_firmware/keyboards/yandrstudio/nz64
History
Ryan 522048725f
Move RGB_MATRIX_DRIVER to data driven (#20350)
2023-04-08 18:08:08 +10:00
..
keymaps Open Use standard magic keycodes in yandrstudio keymaps (#19919) 2023-02-23 14:46:15 +00:00
board.h
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
halconf.h
info.json Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00
mcuconf.h
nz64.c Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
nz64.h Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
readme.md
rules.mk Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

nz64

A 64 keys keyboard with rgb (keys). This keyboard use 16mhz HSE and STM32F401 as MCU.

Make example for this keyboard (after setting up your build environment):

make yandrstudio/nz64:default

See build environment setup then the make instructions for more information.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard
  • Physical reset pins: Short circuit the bt0 and vcc pins on the back of the PCB and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.