qmk_firmware/drivers/haptic/haptic.c
Roland Huber e4c5b1bbbb
Add Per Key exclusions for Haptic Feedback (#12386)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-19 19:28:54 -07:00

423 lines
11 KiB
C

/* Copyright 2019 ishtob
* Driver for haptic feedback written for QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "haptic.h"
#include "eeconfig.h"
#include "progmem.h"
#include "debug.h"
#ifdef DRV2605L
# include "DRV2605L.h"
#endif
#ifdef SOLENOID_ENABLE
# include "solenoid.h"
#endif
haptic_config_t haptic_config;
void haptic_init(void) {
debug_enable = 1; // Debug is ON!
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
haptic_config.raw = eeconfig_read_haptic();
#ifdef SOLENOID_ENABLE
solenoid_set_dwell(haptic_config.dwell);
#endif
if ((haptic_config.raw == 0)
#ifdef SOLENOID_ENABLE
|| (haptic_config.dwell == 0)
#endif
) {
// this will be called, if the eeprom is not corrupt,
// but the previous firmware didn't have haptic enabled,
// or the previous firmware didn't have solenoid enabled,
// and the current one has solenoid enabled.
haptic_reset();
}
#ifdef SOLENOID_ENABLE
solenoid_setup();
dprintf("Solenoid driver initialized\n");
#endif
#ifdef DRV2605L
DRV_init();
dprintf("DRV2605 driver initialized\n");
#endif
eeconfig_debug_haptic();
}
void haptic_task(void) {
#ifdef SOLENOID_ENABLE
solenoid_check();
#endif
}
void eeconfig_debug_haptic(void) {
dprintf("haptic_config eprom\n");
dprintf("haptic_config.enable = %d\n", haptic_config.enable);
dprintf("haptic_config.mode = %d\n", haptic_config.mode);
}
void haptic_enable(void) {
haptic_config.enable = 1;
xprintf("haptic_config.enable = %u\n", haptic_config.enable);
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_disable(void) {
haptic_config.enable = 0;
xprintf("haptic_config.enable = %u\n", haptic_config.enable);
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_toggle(void) {
if (haptic_config.enable) {
haptic_disable();
} else {
haptic_enable();
}
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_feedback_toggle(void) {
haptic_config.feedback++;
if (haptic_config.feedback >= HAPTIC_FEEDBACK_MAX) haptic_config.feedback = KEY_PRESS;
xprintf("haptic_config.feedback = %u\n", !haptic_config.feedback);
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_buzz_toggle(void) {
bool buzz_stat = !haptic_config.buzz;
haptic_config.buzz = buzz_stat;
haptic_set_buzz(buzz_stat);
}
void haptic_mode_increase(void) {
uint8_t mode = haptic_config.mode + 1;
#ifdef DRV2605L
if (haptic_config.mode >= drv_effect_max) {
mode = 1;
}
#endif
haptic_set_mode(mode);
}
void haptic_mode_decrease(void) {
uint8_t mode = haptic_config.mode - 1;
#ifdef DRV2605L
if (haptic_config.mode < 1) {
mode = (drv_effect_max - 1);
}
#endif
haptic_set_mode(mode);
}
void haptic_dwell_increase(void) {
#ifdef SOLENOID_ENABLE
int16_t next_dwell = ((int16_t)haptic_config.dwell) + SOLENOID_DWELL_STEP_SIZE;
if (haptic_config.dwell >= SOLENOID_MAX_DWELL) {
// if it's already at max, we wrap back to min
next_dwell = SOLENOID_MIN_DWELL;
} else if (next_dwell > SOLENOID_MAX_DWELL) {
// if we overshoot the max, then cap at max
next_dwell = SOLENOID_MAX_DWELL;
}
solenoid_set_dwell(next_dwell);
#else
int16_t next_dwell = ((int16_t)haptic_config.dwell) + 1;
#endif
haptic_set_dwell(next_dwell);
}
void haptic_dwell_decrease(void) {
#ifdef SOLENOID_ENABLE
int16_t next_dwell = ((int16_t)haptic_config.dwell) - SOLENOID_DWELL_STEP_SIZE;
if (haptic_config.dwell <= SOLENOID_MIN_DWELL) {
// if it's already at min, we wrap to max
next_dwell = SOLENOID_MAX_DWELL;
} else if (next_dwell < SOLENOID_MIN_DWELL) {
// if we go below min, then we cap to min
next_dwell = SOLENOID_MIN_DWELL;
}
solenoid_set_dwell(next_dwell);
#else
int16_t next_dwell = ((int16_t)haptic_config.dwell) - 1;
#endif
haptic_set_dwell(next_dwell);
}
void haptic_reset(void) {
haptic_config.enable = true;
uint8_t feedback = HAPTIC_FEEDBACK_DEFAULT;
haptic_config.feedback = feedback;
#ifdef DRV2605L
uint8_t mode = HAPTIC_MODE_DEFAULT;
haptic_config.mode = mode;
#endif
#ifdef SOLENOID_ENABLE
uint8_t dwell = SOLENOID_DEFAULT_DWELL;
haptic_config.dwell = dwell;
haptic_config.buzz = SOLENOID_DEFAULT_BUZZ;
solenoid_set_dwell(dwell);
#else
// This is to trigger haptic_reset again, if solenoid is enabled in the future.
haptic_config.dwell = 0;
haptic_config.buzz = 0;
#endif
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
xprintf("haptic_config.mode = %u\n", haptic_config.mode);
}
void haptic_set_feedback(uint8_t feedback) {
haptic_config.feedback = feedback;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
}
void haptic_set_mode(uint8_t mode) {
haptic_config.mode = mode;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.mode = %u\n", haptic_config.mode);
}
void haptic_set_amplitude(uint8_t amp) {
haptic_config.amplitude = amp;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.amplitude = %u\n", haptic_config.amplitude);
#ifdef DRV2605L
DRV_amplitude(amp);
#endif
}
void haptic_set_buzz(uint8_t buzz) {
haptic_config.buzz = buzz;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.buzz = %u\n", haptic_config.buzz);
}
void haptic_set_dwell(uint8_t dwell) {
haptic_config.dwell = dwell;
eeconfig_update_haptic(haptic_config.raw);
xprintf("haptic_config.dwell = %u\n", haptic_config.dwell);
}
uint8_t haptic_get_mode(void) {
if (!haptic_config.enable) {
return false;
}
return haptic_config.mode;
}
uint8_t haptic_get_feedback(void) {
if (!haptic_config.enable) {
return false;
}
return haptic_config.feedback;
}
uint8_t haptic_get_dwell(void) {
if (!haptic_config.enable) {
return false;
}
return haptic_config.dwell;
}
void haptic_enable_continuous(void) {
haptic_config.cont = 1;
xprintf("haptic_config.cont = %u\n", haptic_config.cont);
eeconfig_update_haptic(haptic_config.raw);
#ifdef DRV2605L
DRV_rtp_init();
#endif
}
void haptic_disable_continuous(void) {
haptic_config.cont = 0;
xprintf("haptic_config.cont = %u\n", haptic_config.cont);
eeconfig_update_haptic(haptic_config.raw);
#ifdef DRV2605L
DRV_write(DRV_MODE, 0x00);
#endif
}
void haptic_toggle_continuous(void) {
#ifdef DRV2605L
if (haptic_config.cont) {
haptic_disable_continuous();
} else {
haptic_enable_continuous();
}
eeconfig_update_haptic(haptic_config.raw);
#endif
}
void haptic_cont_increase(void) {
uint8_t amp = haptic_config.amplitude + 10;
if (haptic_config.amplitude >= 120) {
amp = 120;
}
haptic_set_amplitude(amp);
}
void haptic_cont_decrease(void) {
uint8_t amp = haptic_config.amplitude - 10;
if (haptic_config.amplitude < 20) {
amp = 20;
}
haptic_set_amplitude(amp);
}
void haptic_play(void) {
#ifdef DRV2605L
uint8_t play_eff = 0;
play_eff = haptic_config.mode;
DRV_pulse(play_eff);
#endif
#ifdef SOLENOID_ENABLE
solenoid_fire();
#endif
}
__attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t *record) {
switch(keycode) {
# ifdef NO_HAPTIC_MOD
case QK_MOD_TAP ... QK_MOD_TAP_MAX:
if (record->tap.count == 0) return false;
break;
case QK_LAYER_TAP_TOGGLE ... QK_LAYER_TAP_TOGGLE_MAX:
if (record->tap.count != TAPPING_TOGGLE) return false;
break;
case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
if (record->tap.count == 0) return false;
break;
case KC_LCTRL ... KC_RGUI:
case QK_MOMENTARY ... QK_MOMENTARY_MAX:
# endif
# ifdef NO_HAPTIC_FN
case KC_FN0 ... KC_FN31:
# endif
# ifdef NO_HAPTIC_ALPHA
case KC_A ... KC_Z:
# endif
# ifdef NO_HAPTIC_PUNCTUATION
case KC_ENTER:
case KC_ESCAPE:
case KC_BSPACE:
case KC_SPACE:
case KC_MINUS:
case KC_EQUAL:
case KC_LBRACKET:
case KC_RBRACKET:
case KC_BSLASH:
case KC_NONUS_HASH:
case KC_SCOLON:
case KC_QUOTE:
case KC_GRAVE:
case KC_COMMA:
case KC_SLASH:
case KC_DOT:
case KC_NONUS_BSLASH:
# endif
# ifdef NO_HAPTIC_LOCKKEYS
case KC_CAPSLOCK:
case KC_SCROLLLOCK:
case KC_NUMLOCK:
# endif
# ifdef NO_HAPTIC_NAV
case KC_PSCREEN:
case KC_PAUSE:
case KC_INSERT:
case KC_DELETE:
case KC_PGDOWN:
case KC_PGUP:
case KC_LEFT:
case KC_UP:
case KC_RIGHT:
case KC_DOWN:
case KC_END:
case KC_HOME:
# endif
# ifdef NO_HAPTIC_NUMERIC
case KC_1 ... KC_0:
# endif
return false;
}
return true;
}
bool process_haptic(uint16_t keycode, keyrecord_t *record) {
if (keycode == HPT_ON && record->event.pressed) {
haptic_enable();
}
if (keycode == HPT_OFF && record->event.pressed) {
haptic_disable();
}
if (keycode == HPT_TOG && record->event.pressed) {
haptic_toggle();
}
if (keycode == HPT_RST && record->event.pressed) {
haptic_reset();
}
if (keycode == HPT_FBK && record->event.pressed) {
haptic_feedback_toggle();
}
if (keycode == HPT_BUZ && record->event.pressed) {
haptic_buzz_toggle();
}
if (keycode == HPT_MODI && record->event.pressed) {
haptic_mode_increase();
}
if (keycode == HPT_MODD && record->event.pressed) {
haptic_mode_decrease();
}
if (keycode == HPT_DWLI && record->event.pressed) {
haptic_dwell_increase();
}
if (keycode == HPT_DWLD && record->event.pressed) {
haptic_dwell_decrease();
}
if (keycode == HPT_CONT && record->event.pressed) {
haptic_toggle_continuous();
}
if (keycode == HPT_CONI && record->event.pressed) {
haptic_cont_increase();
}
if (keycode == HPT_COND && record->event.pressed) {
haptic_cont_decrease();
}
if (haptic_config.enable) {
if (record->event.pressed) {
// keypress
if (haptic_config.feedback < 2 && get_haptic_enabled_key(keycode, record)) {
haptic_play();
}
} else {
// keyrelease
if (haptic_config.feedback > 0 && get_haptic_enabled_key(keycode, record)) {
haptic_play();
}
}
}
return true;
}
void haptic_shutdown(void) {
#ifdef SOLENOID_ENABLE
solenoid_shutdown();
#endif
}