locker98/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
master
qmk_firmware/keyboards/4pplet/perk60_iso/rev_a
History
James Young 5469f30dfe
Migrate LOCKING_*_ENABLE to Data-Driven: 0-9 (#23716) 
Affects:

  - `0_sixty`
  - `1upkeyboards/pi40`
  - `1upkeyboards/pi50`
  - `40percentclub/gherkin`
  - `4pplet/perk60_iso/rev_a`
2024-05-17 23:55:29 +01:00
..
config.h Migrate LOCKING_*_ENABLE to Data-Driven: 0-9 (#23716) 2024-05-17 23:55:29 +01:00
halconf.h
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: 0-9 (#23716) 2024-05-17 23:55:29 +01:00
mcuconf.h Migrate more F4x1 board files (#18046) 2022-08-15 00:25:40 +01:00
readme.md
rev_a.c LED drivers: update keyboard LED configs (#23073) 2024-02-25 21:29:37 +00:00
rev_a.h Move single 60_ansi, 60_hhkb and 60_iso layouts to data driven (#20438) 2023-04-15 21:09:08 +10:00

readme.md

Perk60 ISO Rev A

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Perk60 ISO Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/perk60_iso/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.