* Initial work for consolidation of board files and default ChibiOS configs.
* Migrate F401/F411 black pills for testing.
* Add early init bootloader jump flag.
* Add support for I2C in order to use i2c_scanner keymap.
* Add F401/F411 HSE bypass to get things booting.
* Exempt "hooked" ChibiOS conf files from updater script.
* Fix up ordering for bootloader_defs file check.
* Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
* CLI: Improve experience when running `qmk setup` on FreeBSD.
* Install the `avrdude` package as well.
* Switch to installing python packages w/ `--user` flag.
* Basic getting started sections for FreeBSD.
* Update `util/freebsd_install.sh` for root/non-root branches.
* Add ID to doc section.
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Add ID to another docs section.
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Use `; then` in script for consistency.
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Updated to use sudo in one shot if available.
* Apply suggestions from code review
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Style fixes for latest version in master.
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: skullydazed <skullydazed@users.noreply.github.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Improve stock bootloader list
* Switch version numbers on USB64/128 bootloaders
* Unix line endings for PS2AVRGB bootloader
* Update PS2AVRGB bootloader to 1.0.1
* Also mention bootloader rule
* Didn't need to change the links
GCC 4.9.4 is no longer available on Gentoo (or Sabayon), which causes
problems when attempting to install on either of these platforms. Since
QMK is not particularly sensitive to its GCC version, modify the version
restriction to <9 so newer versions of GCC may be installed. Since the
toolchain for arm-none-eabi isn't currently installed as part of setup,
add that as well.
Additionally, drop the Python installation as part of the Gentoo
installation process. Python is a core system package on Gentoo and can
therefore be assumed to be present; in addition, the slot restriction of
3.5 which was present is also no longer available in Gentoo.
Finally, separate the gcc rebuild invocation of `emerge` from the new
packages that may need to be installed, and apply the `--noreplace` flag
to new packages so that they are not rebuilt if already present.
* Add creation of new chlid keyboard
* Add creation of new keyboard's parent directories
* Remove redundant message and if statement
* Divide creating new keyboard directory from copying template files
* Fix variables of year placeholder
* Fix filename of keyboard.[ch]
* Fix linux install for Ubuntu. It failed due to sh not supporting [ and pip being seperate from python3
* Adapted install function according to feedback
* Fix style
* Install bootloadHid on macos
* Install bootloadHid on windows
* Highlight bootloadHID is now installed in docs
* Update udev rules for bootloadHID
* Install bootloadHid on some distros
* fix caterina udev filename
* Make MSYS force install
* Cleanup msys script
* Update to gcc 8.3 for arm and avr
And cleanup install scripts for both
* Fix path and scripts
* Fix links
* No confirmation for msys
* Tweak arm function since file structure changed
* Fix spacing and wording
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Only use MSYS2's make binary
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Some wordsmithing
Co-Authored-By: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com>
* Add "disable download timeout" for download issues in MSYS
Co-Authored-By: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com>
* Clean up URL for arm gcc download
Co-Authored-By: Joel Challis <git@zvecr.com>
* add pip
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Use .template file extension for keyboard template files
* Filter out .template files completely before passing to clang-format
* Undo file extension stuff; just ignore quantum/template dir
* Rework how bin/qmk handles subcommands
* qmk config wip
* Code to show all configs
* Fully working `qmk config` command
* Mark some CLI arguments so they don't pollute the config file
* Fleshed out config support, nicer subcommand support
* sync with installable cli
* pyformat
* Add a test for subcommand_modules
* Documentation for the `qmk config` command
* split config_token on space so qmk config is more predictable
* Rework how subcommands are imported
* Document `arg_only`
* Document deleting from CLI
* Document how multiple operations work
* Add cli config to the doc index
* Add tests for the cli commands
* Make running the tests more reliable
* Be more selective about building all default keymaps
* Update new-keymap to fit the new subcommand style
* Add documentation about writing CLI scripts
* Document new-keyboard
* Update docs/cli_configuration.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/cli_development.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/cli_development.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/cli_development.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Address yan's comments.
* Apply suggestions from code review
suggestions from @noahfrederick
Co-Authored-By: Noah Frederick <code@noahfrederick.com>
* Apply suggestions from code review
Co-Authored-By: Noah Frederick <code@noahfrederick.com>
* Remove pip3 from the test runner
* Add support for Void Linux systems to the qmk_install.sh script
* Fix typos + grammatical edits in comments
* Sort distributions by alphabetical order in linux_install.sh
* Revert previous commit and sort Void packages in alphabetical order
* Fix permissions on `util/linux_install.sh`
* Add `dfu-programmer` to `pacman -S` (#6618)
`dfu-programmer` now resides at `extra/dfu-programmer` and is no longer
in the AUR
* Add `--needed` option to `pacman -S` for efficiency
* Fix
* Update util/linux_install.sh
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Add an alternative method for keyboard discovery to speed up build
* Chain MAKEFLAGS for docker_build.sh
* Slight improvement to number of items sent to sort
* Remove debug line
* Fix line escape
* Initial conversion of vagrant to use qmkfm/base_container
* Fix vagrant when using docker provider
* Workaround for VirtualBox VM restarts
* Generalise Vagrant docs slightly and add FAQ
* Script to generate keymap.c from JSON file.
* Support for keymap.json
* Add a warning about the keymap.c getting overwritten.
* Fix keymap generating
* Install the python deps
* Flesh out more of the python environment
* Remove defunct json2keymap
* Style everything with yapf
* Polish up python support
* Hide json keymap.c into the .build dir
* Polish up qmk-compile-json
* Make milc work with positional arguments
* Fix a couple small things
* Fix some errors and make the CLI more understandable
* Make the qmk wrapper more robust
* Add basic QMK Doctor
* Clean up docstrings and flesh them out as needed
* remove unused compile_firmware() function
* Switch version incrementing to the command put together by @noroadsleft.
* Update util/travis_compiled_push.sh
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* docker_build.sh: Docker requires access to hosts devices
This also runs the container interactively which allows the user to
interupt the build with Ctrl-C.
* docker_build.sh: Mount /dev via $usb_args instead
* If RGBLIGHT_EFFECT_BREATHE_CENTER is undefined, use fixed breathe table instead of exp() and sin()
* Change rgblight breathing table size to be easily selectable.
add RGBLIGHT_BREATHE_TABLE_SIZE macro for customize breathing effect.
* A better new_project.sh
* Fix docstrings
* Use single quotes for anything not shown to user
* Missed this docstring
* Simplify get_git_username()
Thanks @vomindoraan
* chmod +x
* Add docstring for print_error()
* Break up git username call into multiple lines
* Use with statement here
* Conform to PEP 8 even more
* Turn it back into a shell script
* chmod +x again
* Update docs to reflect new keyboard generator usage
* Tweak wording slightly
* Trim trailing whitespace
* Don't actually need to escape the newlines here
* As I suspected, you can pass shift a number
* Prepend ./ to match the other code block
* Minor syntax tweaks
* The username token has changed
* Replace name in the readme too
* Make some reasonable assumptions about the presence of Git
* Revert "Update build instructions and Dockerfile to download submodules"
This reverts commit 93210547bd.
* Update build tools docs based on feedback
* Fix bad link in build tools docs
* Grab HEX and BIN files from autogen
And push them to qmk.fm/compiled
* Make autogen copy extension agnostic
This way, when travis cl scrpit looks for hex files, it will actually grab bin files, and not hex files for ARM boards
* Handle the AUTOGEN in :bin target to properly handle edge cases
Both the TADA68 and ATSAM boards generate the hex file and then convert it to a bin file. The changes I made does not handle this well, at all. This removes the hex and replaces it with a bin, if a bin is normally generated.
* Revert hex target to original copy command
* Check hex and bin separately in compile push script
Since I don't know how to script this, well
* Simplify push to compiled folder
* Further simplify compiled push script
* Move AUTOGEN parsing to a more sane location to prevent tech debt
Thanks to skully!
* Remove AUTOGEN completely, as it's not needed
This has the benefit of making everything super simple, since we can pull every hex and bin from the root of the qmk_firmware folder, and move that to th compiled folder. This also removes old and unneeded code, and removes some tech debt that has been accrued, without adding more, in theory.
* Change spaces to tabs on two lines
The rest of the file uses tabs
* Read user input in a non-terrible, non-hacky way
* Remove unnecessary tee call
* read -p is not POSIX
* Add missing $ to echo GENTOO_WARNING
* Replace non-POSIX echo -n with printf
* Use cd ... || exit 1 in case git clone fails
* Add missing sudo
Thanks @snortwolf
* Undo replacing tee with >>
On a laptop with god knows what mandatory security software (Cylance?), running up-to-date Windows 10 with msys2 mingw-64, attempting to install the AVR toolkit results in the following error:
```
1 [main] 7z (13316) C:\msys32\usr\lib\p7zip\7z.exe: *** fatal error - cygheap base mismatch detected - 0x612A5410/0x2375410.
This problem is probably due to using incompatible versions of the cygwin DLL.
Search for cygwin1.dll using the Windows Start->Find/Search facility
and delete all but the most recent version. The most recent version *should*
reside in x:\cygwin\bin, where 'x' is the drive on which you have
installed the cygwin distribution. Rebooting is also suggested if you
are unable to find another cygwin DLL.
```
This appears to be related in some way, based on my research, to ASLR functionality in security software. Since I'm unable to override whatever is enforcing ASLR on my system, after trying several other approaches (removing other copies of msys-2.0.dll, which is what this is apparently actually referencing, rebasing that file in Windows to address 0x61000000, a few other things) I simply edited the installation shell script to use `unzip` instead of 7zip; `unzip`'s binary does not provoke a mismatch error and the installation proceeds as it should.
I'm not aware of the reason why some parts of the install script use `unzip` (e.g. `install_arm`) and others use 7zip, but it seems that for broader compatibility and sparing users on locked down machines the 120 minutes or so of futzing this took me to fix, it might be better to just use `unzip` in all cases.
Note: There is another function that uses 7zip, `extract_flip`. The line is `7z -oflip x FlipInstaller.exe`. I'm not sure what this is doing, or whether it's possible to do it with `unzip`, but it produces the same error. I haven't attempted to fix that in this PR, but it might be good to fix it for the same reason.
* Add a Docker build script
* Add usage and error messages
* Add -r to reads
Thanks mechmerlin
* Add keyboard:keymap form, improve script
* Add target argument, change usage forms in script
* Add check for more than 3 args in keyboard:keymap:target form
* Change Docker base image to debian, use community repo
This matches what qmk_compiler uses (https://github.com/qmk/qmk_compiler/blob/master/Dockerfile#L1).
I've removed the maintainer as we now have a community build on Docker Hub (https://hub.docker.com/r/qmkfm/qmk_firmware). This Dockerfile will also be maintained by the community.
* Change build command format to keyboard:keymap
* Call make directly in container run command
* Simplify script, remove 3-arg form
* Add COPY to Dockerfile so images are usable in and of themselves
Also change WORKDIR from /qmk to /qmk_firmware
* Add USB pass-through for Linux and docker-machine hosts
* Read directly into variables instead of array
* Alphabetically sort dependencies in Dockerfile
* Set executable bit on util/docker_build.sh
* Update Docker docs
* Add warning about Docker on Windows
* Expand comment in docs
* Check docker-machine exit code instead of string
* Only match --help with whole arguments
* Make script POSIX-compliant
* Convert script indentation to tabs
* Add support for slackware distribution (linux_install.sh)
The required packages are not provided by the official repository. The packages
need to be installed from slackbuilds.org either manually or with the help of
third party tools like sbotools.
* Modify linux_install.sh according to code review
Modifies the Slackware section of the linux_install.sh script based on the
suggestions from the code review.
* Modify utils/linux_install.sh according to suggestions
