diff --git a/keyboards/mxss/config.h b/keyboards/mxss/config.h new file mode 100644 index 0000000000..8be64e0b38 --- /dev/null +++ b/keyboards/mxss/config.h @@ -0,0 +1,138 @@ +/* +Copyright 2018 Jumail Mundekkat / MxBlue + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MxBlue +#define PRODUCT MxSS +#define DESCRIPTION Custom Polycarb Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* matrix pin configuration */ +#define MATRIX_ROW_PINS { F4, F1, F7, B1, B7 } +#define MATRIX_COL_PINS { D7, D6, D4, D0, C6, B6, D1, B5, D2, B4, D3, D5, B0, B2, B3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Basic RGB configuration */ +#define RGB_DI_PIN C7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 20 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +#endif diff --git a/keyboards/mxss/info.json b/keyboards/mxss/info.json new file mode 100644 index 0000000000..76321e8139 --- /dev/null +++ b/keyboards/mxss/info.json @@ -0,0 +1,45 @@ +{ + "keyboard_name": "MxSS", + "maintainer": "qmk", + "url": "https://geekhack.org/index.php?topic=94986.0", + "height": 5, + "width": 16, + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_7u": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_splitspace": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_splitbs": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_splitbs_7u": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_splitbs_splitspace": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_iso": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_iso_7u": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_iso_splitspace": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_iso_splitbs": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_iso_splitbs_7u": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + "LAYOUT_ISO_splitbs_splitspace": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} diff --git a/keyboards/mxss/keymaps/default/config.h b/keyboards/mxss/keymaps/default/config.h new file mode 100644 index 0000000000..9f86225799 --- /dev/null +++ b/keyboards/mxss/keymaps/default/config.h @@ -0,0 +1,24 @@ +/* Copyright 2018 Jumail Mundekkat / MxBlue + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +// place overrides here + +#endif diff --git a/keyboards/mxss/keymaps/default/keymap.c b/keyboards/mxss/keymaps/default/keymap.c new file mode 100644 index 0000000000..47983c90c6 --- /dev/null +++ b/keyboards/mxss/keymaps/default/keymap.c @@ -0,0 +1,89 @@ +/* Copyright 2018 Jumail Mundekkat / MxBlue + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Colors for layers +// Format: {hue, saturation} +// {0, 0} to turn off the LED +// Add additional rows to handle more layers +const hs_set layer_colors[] = { + [0] = {0, 0}, // Color for Layer 0 + [1] = {86, 255}, // Color for Layer 1 + [2] = {36, 255}, // Color for Layer 2 + [3] = {185, 255}, // Color for Layer 3 +}; +const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t); + +// Use NEW_SAFE_RANGE to define new custom keycodes in order to not overwrite the ones used for front LED control +enum custom_keycodes { + MY_KEYCODE = NEW_SAFE_RANGE, +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT +), + + LAYOUT( /* L1 */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PSCR, FLED_VAD, FLED_VAI, FLED_MOD, RGB_VAI, + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, RGB_MOD, RGB_SAI, RGB_TOG, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI +), +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/mxss/mxss.c b/keyboards/mxss/mxss.c new file mode 100644 index 0000000000..b16348c7bd --- /dev/null +++ b/keyboards/mxss/mxss.c @@ -0,0 +1,209 @@ +/* Copyright 2018 Jumail Mundekkat / MxBlue + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "tmk_core/common/eeprom.h" +#include "tmk_core/common/action_layer.h" +#include "rgblight.h" + +// Variables for controlling front LED application +uint8_t fled_mode; // Mode for front LEDs +uint8_t fled_val; // Brightness for front leds (0 - 255) +LED_TYPE fleds[2]; // Front LED rgb values for indicator mode use + +// Predefined colors for layers +// Format: {hue, saturation} +// {0, 0} to turn off the LED +// Add additional rows to handle more layers +__attribute__ ((weak)) +const hs_set layer_colors[] = { + [0] = {0, 0}, // Color for Layer 0 + [1] = {86, 255}, // Color for Layer 1 + [2] = {36, 255}, // Color for Layer 2 + [3] = {185, 255}, // Color for Layer 3 +}; + +__attribute__ ((weak)) +const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t); + +void matrix_init_kb(void) { + // If EEPROM config exists, load it + if (eeprom_is_valid()) { + fled_config fled_conf; + fled_conf.raw = eeprom_read_byte(EEPROM_FRONTLED_ADDR); + fled_mode = fled_conf.mode; + fled_val = fled_conf.val * FLED_VAL_STEP; + // Else, default config + } else { + fled_mode = FLED_RGB; + fled_val = 10 * FLED_VAL_STEP; + eeprom_update_conf(); // Store default config to EEPROM + } + + // Set default values for leds + setrgb(0, 0, 0, &fleds[0]); + setrgb(0, 0, 0, &fleds[1]); + + // Handle lighting for indicator mode + if (fled_mode == FLED_INDI) { + // Enable capslock led if enabled on host + if (host_keyboard_leds() & (1<event.pressed) + fled_mode_cycle(); + break; + + case FLED_VAI: // Increase the brightness of the front LEDs by FLED_VAL_STEP + if (record->event.pressed) + fled_val_increase(); + break; + + case FLED_VAD: // Decrease the brightness of the front LEDs by FLED_VAL_STEP + if (record->event.pressed) + fled_val_decrease(); + break; + + default: + break; // Process all other keycodes normally + } + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // Set indicator LED appropriately, whether it is used or not + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + sethsv(FLED_CAPS_H, FLED_CAPS_S, fled_val, &fleds[0]); + } else { + setrgb(0, 0, 0, &fleds[0]); + } + + led_set_user(usb_led); +} + +uint32_t layer_state_set_kb(uint32_t state) { + // Determine and set colour of layer LED according to current layer + // if hue = sat = 0, leave LED off + uint8_t layer = biton32(state); + + if (layer < lc_size && !(layer_colors[layer].hue == 0 && layer_colors[layer].hue == 0)) + sethsv(layer_colors[layer].hue, layer_colors[layer].sat, fled_val, &fleds[1]); + else + setrgb(0, 0, 0, &fleds[1]); + + return state; +} + +// EEPROM Management + +// Test if magic value is present at expected location +bool eeprom_is_valid(void) +{ + return (eeprom_read_word(EEPROM_MAGIC_ADDR) == EEPROM_MAGIC); +} + +// Set magic value at expected location +void eeprom_set_valid(bool valid) +{ + eeprom_update_word(EEPROM_MAGIC_ADDR, valid ? EEPROM_MAGIC : 0xFFFF); +} + +// Store current front led config in EEPROM +void eeprom_update_conf(void) +{ + // Create storage struct and set values + fled_config conf; + conf.mode = fled_mode; + + // Small hack to ensure max value is stored correctly + if (fled_val == 255) + conf.val = 256 / FLED_VAL_STEP; + else + conf.val = fled_val / FLED_VAL_STEP; + + // Set magic value and store config + eeprom_set_valid(true); + eeprom_update_byte(EEPROM_FRONTLED_ADDR, conf.raw); +} + +// Custom keycode functions + +void fled_mode_cycle(void) +{ + // FLED -> FLED_RGB -> FLED_INDI + switch (fled_mode) { + case FLED_OFF: + fled_mode = FLED_RGB; + break; + + case FLED_RGB: + fled_mode = FLED_INDI; + break; + + case FLED_INDI: + fled_mode = FLED_OFF; + break; + } + + // Update stored config + eeprom_update_conf(); +} + +void fled_val_increase(void) +{ + // Increase val by FLED_VAL_STEP, handling the upper edge case + if (fled_val + FLED_VAL_STEP > 255) + fled_val = 255; + else + fled_val += FLED_VAL_STEP; + + // Update stored config + eeprom_update_conf(); +} + +void fled_val_decrease(void) +{ + // Decrease val by FLED_VAL_STEP, handling the lower edge case + if (fled_val - FLED_VAL_STEP > 255) + fled_val = 255; + else + fled_val -= FLED_VAL_STEP; + + // Update stored config + eeprom_update_conf(); +} diff --git a/keyboards/mxss/mxss.h b/keyboards/mxss/mxss.h new file mode 100644 index 0000000000..bd0af86ca2 --- /dev/null +++ b/keyboards/mxss/mxss.h @@ -0,0 +1,207 @@ +/* Copyright 2018 Jumail Mundekkat / MxBlue + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef MXSS_H +#define MXSS_H + +#include "quantum.h" +#include "mxss_frontled.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k10E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k10E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ +} +//ANSI, normalBS, 7u +#define LAYOUT_7u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k46, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k4B, k4C, k4D, k4E }, \ +} +//ANSI, normalBS, split space +#define LAYOUT_splitspace( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k46, k48, k4A, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ +} +//ANSI, splitBS, 6.25u +#define LAYOUT_splitbs( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ +} +//ANSI, splitBS, 7u +#define LAYOUT_splitbs_7u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k46, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k4B, k4C, k4D, k4E }, \ +} +//ANSI, normalBS, split space +#define LAYOUT_splitbs_splitspace( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k46, k48, k4A, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ +} +//ISO, normalBS, 6.25u +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ +} +//ISO, normalBS, 7u +#define LAYOUT_iso_7u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k46, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k4B, k4C, k4D, k4E }, \ +} +//ISO, normalBS, split space +#define LAYOUT_iso_splitspace( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k46, k48, k4A, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ +} +//ISO, splitBS, 6.25u +#define LAYOUT_iso_splitbs( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ +} +//ISO, splitBS, 7u +#define LAYOUT_iso_splitbs_7u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k46, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k4B, k4C, k4D, k4E }, \ +} +//ISO, splitBS, split space +#define LAYOUT_iso_splitbs_splitspace( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k46, k48, k4A, k4B, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ +} + +#endif diff --git a/keyboards/mxss/mxss_frontled.h b/keyboards/mxss/mxss_frontled.h new file mode 100644 index 0000000000..1350266ba9 --- /dev/null +++ b/keyboards/mxss/mxss_frontled.h @@ -0,0 +1,81 @@ +/* Copyright 2018 Jumail Mundekkat / MxBlue + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// EEPROM management code taken from Wilba6582 +// https://github.com/Wilba6582/qmk_firmware/blob/zeal60/keyboards/zeal60/zeal_eeprom.h + +#ifndef MXSS_FRONTLED_H +#define MXSS_FRONTLED_H + +#include "quantum_keycodes.h" + +// RGBLED index for front LEDs +#define RGBLIGHT_FLED1 14 +#define RGBLIGHT_FLED2 15 + +// Brightness increase step for front LEDs +#define FLED_VAL_STEP 8 + +// QMK never uses more then 32bytes of EEPROM, so our region starts there +// Magic value to verify the state of the EEPROM +#define EEPROM_MAGIC 0xC3E7 +#define EEPROM_MAGIC_ADDR ((void*)32) + +// Front LED settings +#define EEPROM_FRONTLED_ADDR ((void*)34) + +// Modes for front LEDs +#define FLED_OFF 0b00 +#define FLED_INDI 0b01 +#define FLED_RGB 0b10 +#define FLED_UNDEF 0b11 + +// Hard-coded color for capslock indicator in FLED_INDI mode, H:0% S:100% = Red +#define FLED_CAPS_H 0 +#define FLED_CAPS_S 255 + +// Config storage format for EEPROM +typedef union { + uint8_t raw; + struct { + uint8_t mode :2; + uint8_t val :6; + }; +} fled_config; + +// Structure to store hue and saturation values +typedef struct _hs_set { + uint16_t hue; + uint8_t sat; +} hs_set; + +// Custom keycodes for front LED control +enum fled_keycodes { + FLED_MOD = SAFE_RANGE, + FLED_VAI, + FLED_VAD, + NEW_SAFE_RANGE // define a new safe range +}; + +bool eeprom_is_valid(void); // Check if EEPROM has been set up +void eeprom_set_valid(bool valid); // Change validity state of EEPROM +void eeprom_update_conf(void); // Store current front LED config to EEPROM + +void fled_mode_cycle(void); // Cycle between the 3 modes for the front LEDs +void fled_val_increase(void); // Increase the brightness of the front LEDs +void fled_val_decrease(void); // Decrease the brightness of the front LEDs + +#endif //MXSS_FRONTLED_H \ No newline at end of file diff --git a/keyboards/mxss/readme.md b/keyboards/mxss/readme.md new file mode 100644 index 0000000000..54e07e27b0 --- /dev/null +++ b/keyboards/mxss/readme.md @@ -0,0 +1,54 @@ +# MxSS - Polycarb 65% Kit for MX/SMK + +![MxSS - Polycarb 65% Kit for MX/SMK](https://i.imgur.com/WDTWcmU.jpg) + +### Information: + + - Case: Frosted Polycarbonate, CNC milled + - Plate: Brass, mirror-finished and electroplated + - Weight: Same as plate + - PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish + +### Details: + + - 2.9 degrees angle on the case + - Top mount plate + - Center USB, Type-B Mini + - MX and SMK (White and Orange) switch support + - Holtite support + - RGB underglow + - 1.5kg with plate and weight + +Keyboard Maintainer: [MxBlue](https://github.com/mxblu) + +Hardware Supported: Custom PCB, ATMega32u4 + +Hardware Availability: https://geekhack.org/index.php?topic=94986.0 + +Make example for this keyboard (after setting up your build environment): + + make mxss:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +# Front LED Operation + +The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes. + +There are 3 modes of operation: + + - FLED_OFF - Front LEDs stay off + - FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request) + - FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer + +Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example). + +## Custom Keycodes + + - FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI) + - FLED_VAI - Increase front LED brightness + - FLED_VAD - Decrease front LED brightness + + # Further Notes + + As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example. \ No newline at end of file diff --git a/keyboards/mxss/rgblight.c b/keyboards/mxss/rgblight.c new file mode 100644 index 0000000000..f65d23c8c1 --- /dev/null +++ b/keyboards/mxss/rgblight.c @@ -0,0 +1,804 @@ +/* Copyright 2016-2017 Yang Liu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include +#include +#include +#include +#include "progmem.h" +#include "timer.h" +#include "rgblight.h" +#include "debug.h" +#include "led_tables.h" +#include "mxss_frontled.h" + +#ifndef RGBLIGHT_LIMIT_VAL +#define RGBLIGHT_LIMIT_VAL 255 +#endif + +#define MIN(a,b) (((a)<(b))?(a):(b)) +#define MAX(a,b) (((a)>(b))?(a):(b)) + +#define LED_PTRTOIND(ptr) ((uint32_t) (ptr - led)/sizeof(LED_TYPE)) + +void copyrgb(LED_TYPE *src, LED_TYPE *dst); + +__attribute__ ((weak)) +const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5}; +__attribute__ ((weak)) +const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30}; +__attribute__ ((weak)) +const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20}; +__attribute__ ((weak)) +const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20}; +__attribute__ ((weak)) +const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31}; +__attribute__ ((weak)) +const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90}; +__attribute__ ((weak)) +const uint16_t RGBLED_RGBTEST_INTERVALS[] PROGMEM = {1024}; + +rgblight_config_t rgblight_config; + +LED_TYPE led[RGBLED_NUM]; + +bool rgblight_timer_enabled = false; + +extern uint8_t fled_mode; +extern uint8_t fled_val; +extern LED_TYPE fleds[2]; +hs_set fled_hs[2]; + +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { + uint8_t r = 0, g = 0, b = 0, base, color; + + // if led is front leds, cache the hue and sat values + if (led1 == &led[RGBLIGHT_FLED1]) { + fled_hs[0].hue = hue; + fled_hs[0].sat = sat; + } else if (led1 == &led[RGBLIGHT_FLED2]) { + fled_hs[1].hue = hue; + fled_hs[1].sat = sat; + } + + if (val > RGBLIGHT_LIMIT_VAL) { + val=RGBLIGHT_LIMIT_VAL; // limit the val + } + + if (sat == 0) { // Acromatic color (gray). Hue doesn't mind. + r = val; + g = val; + b = val; + } else { + base = ((255 - sat) * val) >> 8; + color = (val - base) * (hue % 60) / 60; + + switch (hue / 60) { + case 0: + r = val; + g = base + color; + b = base; + break; + case 1: + r = val - color; + g = val; + b = base; + break; + case 2: + r = base; + g = val; + b = base + color; + break; + case 3: + r = base; + g = val - color; + b = val; + break; + case 4: + r = base + color; + g = base; + b = val; + break; + case 5: + r = val; + g = base; + b = val - color; + break; + } + } + r = pgm_read_byte(&CIE1931_CURVE[r]); + g = pgm_read_byte(&CIE1931_CURVE[g]); + b = pgm_read_byte(&CIE1931_CURVE[b]); + + setrgb(r, g, b, led1); +} + +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) { + (*led1).r = r; + (*led1).g = g; + (*led1).b = b; +} + +void copyrgb(LED_TYPE *src, LED_TYPE *dst) { + (*dst).r = (*src).r; + (*dst).g = (*src).g; + (*dst).b = (*src).b; +} + +uint32_t eeconfig_read_rgblight(void) { + return eeprom_read_dword(EECONFIG_RGBLIGHT); +} +void eeconfig_update_rgblight(uint32_t val) { + eeprom_update_dword(EECONFIG_RGBLIGHT, val); +} +void eeconfig_update_rgblight_default(void) { + dprintf("eeconfig_update_rgblight_default\n"); + rgblight_config.enable = 1; + rgblight_config.mode = 1; + rgblight_config.hue = 0; + rgblight_config.sat = 255; + rgblight_config.val = RGBLIGHT_LIMIT_VAL; + rgblight_config.speed = 0; + eeconfig_update_rgblight(rgblight_config.raw); +} +void eeconfig_debug_rgblight(void) { + dprintf("rgblight_config eprom\n"); + dprintf("rgblight_config.enable = %d\n", rgblight_config.enable); + dprintf("rghlight_config.mode = %d\n", rgblight_config.mode); + dprintf("rgblight_config.hue = %d\n", rgblight_config.hue); + dprintf("rgblight_config.sat = %d\n", rgblight_config.sat); + dprintf("rgblight_config.val = %d\n", rgblight_config.val); + dprintf("rgblight_config.speed = %d\n", rgblight_config.speed); +} + +void rgblight_init(void) { + debug_enable = 1; // Debug ON! + dprintf("rgblight_init called.\n"); + dprintf("rgblight_init start!\n"); + if (!eeconfig_is_enabled()) { + dprintf("rgblight_init eeconfig is not enabled.\n"); + eeconfig_init(); + eeconfig_update_rgblight_default(); + } + rgblight_config.raw = eeconfig_read_rgblight(); + if (!rgblight_config.mode) { + dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n"); + eeconfig_update_rgblight_default(); + rgblight_config.raw = eeconfig_read_rgblight(); + } + eeconfig_debug_rgblight(); // display current eeprom values + + #ifdef RGBLIGHT_ANIMATIONS + rgblight_timer_init(); // setup the timer + #endif + + if (rgblight_config.enable) { + rgblight_mode_noeeprom(rgblight_config.mode); + } +} + +void rgblight_update_dword(uint32_t dword) { + rgblight_config.raw = dword; + eeconfig_update_rgblight(rgblight_config.raw); + if (rgblight_config.enable) + rgblight_mode(rgblight_config.mode); + else { + #ifdef RGBLIGHT_ANIMATIONS + rgblight_timer_disable(); + #endif + rgblight_set(); + } +} + +void rgblight_increase(void) { + uint8_t mode = 0; + if (rgblight_config.mode < RGBLIGHT_MODES) { + mode = rgblight_config.mode + 1; + } + rgblight_mode(mode); +} +void rgblight_decrease(void) { + uint8_t mode = 0; + // Mode will never be < 1. If it ever is, eeprom needs to be initialized. + if (rgblight_config.mode > 1) { + mode = rgblight_config.mode - 1; + } + rgblight_mode(mode); +} +void rgblight_step(void) { + uint8_t mode = 0; + mode = rgblight_config.mode + 1; + if (mode > RGBLIGHT_MODES) { + mode = 1; + } + rgblight_mode(mode); +} +void rgblight_step_reverse(void) { + uint8_t mode = 0; + mode = rgblight_config.mode - 1; + if (mode < 1) { + mode = RGBLIGHT_MODES; + } + rgblight_mode(mode); +} + +uint32_t rgblight_get_mode(void) { + if (!rgblight_config.enable) { + return false; + } + + return rgblight_config.mode; +} + +void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) { + if (!rgblight_config.enable) { + return; + } + if (mode < 1) { + rgblight_config.mode = 1; + } else if (mode > RGBLIGHT_MODES) { + rgblight_config.mode = RGBLIGHT_MODES; + } else { + rgblight_config.mode = mode; + } + if (write_to_eeprom) { + eeconfig_update_rgblight(rgblight_config.raw); + xprintf("rgblight mode [EEPROM]: %u\n", rgblight_config.mode); + } else { + xprintf("rgblight mode [NOEEPROM]: %u\n", rgblight_config.mode); + } + if (rgblight_config.mode == 1) { + #ifdef RGBLIGHT_ANIMATIONS + rgblight_timer_disable(); + #endif + } else if ((rgblight_config.mode >= 2 && rgblight_config.mode <= 24) || + rgblight_config.mode == 35 ) { + // MODE 2-5, breathing + // MODE 6-8, rainbow mood + // MODE 9-14, rainbow swirl + // MODE 15-20, snake + // MODE 21-23, knight + // MODE 24, xmas + // MODE 35 RGB test + + #ifdef RGBLIGHT_ANIMATIONS + rgblight_timer_enable(); + #endif + } else if (rgblight_config.mode >= 25 && rgblight_config.mode <= 34) { + // MODE 25-34, static gradient + + #ifdef RGBLIGHT_ANIMATIONS + rgblight_timer_disable(); + #endif + } + rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); +} + +void rgblight_mode(uint8_t mode) { + rgblight_mode_eeprom_helper(mode, true); +} + +void rgblight_mode_noeeprom(uint8_t mode) { + rgblight_mode_eeprom_helper(mode, false); +} + + +void rgblight_toggle(void) { + xprintf("rgblight toggle [EEPROM]: rgblight_config.enable = %u\n", !rgblight_config.enable); + if (rgblight_config.enable) { + rgblight_disable(); + } + else { + rgblight_enable(); + } +} + +void rgblight_toggle_noeeprom(void) { + xprintf("rgblight toggle [NOEEPROM]: rgblight_config.enable = %u\n", !rgblight_config.enable); + if (rgblight_config.enable) { + rgblight_disable_noeeprom(); + } + else { + rgblight_enable_noeeprom(); + } +} + +void rgblight_enable(void) { + rgblight_config.enable = 1; + // No need to update EEPROM here. rgblight_mode() will do that, actually + //eeconfig_update_rgblight(rgblight_config.raw); + xprintf("rgblight enable [EEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable); + rgblight_mode(rgblight_config.mode); +} + +void rgblight_enable_noeeprom(void) { + rgblight_config.enable = 1; + xprintf("rgblight enable [NOEEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable); + rgblight_mode_noeeprom(rgblight_config.mode); +} + +void rgblight_disable(void) { + rgblight_config.enable = 0; + eeconfig_update_rgblight(rgblight_config.raw); + xprintf("rgblight disable [EEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable); + #ifdef RGBLIGHT_ANIMATIONS + //rgblight_timer_disable(); + #endif + _delay_ms(50); + rgblight_set(); +} + +void rgblight_disable_noeeprom(void) { + rgblight_config.enable = 0; + xprintf("rgblight disable [noEEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable); + #ifdef RGBLIGHT_ANIMATIONS + rgblight_timer_disable(); + #endif + _delay_ms(50); + rgblight_set(); +} + + +// Deals with the messy details of incrementing an integer +uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) { + int16_t new_value = value; + new_value += step; + return MIN( MAX( new_value, min ), max ); +} + +uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) { + int16_t new_value = value; + new_value -= step; + return MIN( MAX( new_value, min ), max ); +} + +void rgblight_increase_hue(void) { + uint16_t hue; + hue = (rgblight_config.hue+RGBLIGHT_HUE_STEP) % 360; + rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val); +} +void rgblight_decrease_hue(void) { + uint16_t hue; + if (rgblight_config.hue-RGBLIGHT_HUE_STEP < 0) { + hue = (rgblight_config.hue + 360 - RGBLIGHT_HUE_STEP) % 360; + } else { + hue = (rgblight_config.hue - RGBLIGHT_HUE_STEP) % 360; + } + rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val); +} +void rgblight_increase_sat(void) { + uint8_t sat; + if (rgblight_config.sat + RGBLIGHT_SAT_STEP > 255) { + sat = 255; + } else { + sat = rgblight_config.sat + RGBLIGHT_SAT_STEP; + } + rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val); +} +void rgblight_decrease_sat(void) { + uint8_t sat; + if (rgblight_config.sat - RGBLIGHT_SAT_STEP < 0) { + sat = 0; + } else { + sat = rgblight_config.sat - RGBLIGHT_SAT_STEP; + } + rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val); +} +void rgblight_increase_val(void) { + uint8_t val; + if (rgblight_config.val + RGBLIGHT_VAL_STEP > RGBLIGHT_LIMIT_VAL) { + val = RGBLIGHT_LIMIT_VAL; + } else { + val = rgblight_config.val + RGBLIGHT_VAL_STEP; + } + rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val); +} +void rgblight_decrease_val(void) { + uint8_t val; + if (rgblight_config.val - RGBLIGHT_VAL_STEP < 0) { + val = 0; + } else { + val = rgblight_config.val - RGBLIGHT_VAL_STEP; + } + rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val); +} +void rgblight_increase_speed(void) { + rgblight_config.speed = increment( rgblight_config.speed, 1, 0, 3 ); + eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this +} + +void rgblight_decrease_speed(void) { + rgblight_config.speed = decrement( rgblight_config.speed, 1, 0, 3 ); + eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this +} + +void rgblight_sethsv_noeeprom_old(uint16_t hue, uint8_t sat, uint8_t val) { + if (rgblight_config.enable) { + LED_TYPE tmp_led; + sethsv(hue, sat, val, &tmp_led); + // dprintf("rgblight set hue [MEMORY]: %u,%u,%u\n", inmem_config.hue, inmem_config.sat, inmem_config.val); + rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b); + } +} + +void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom) { + if (rgblight_config.enable) { + if (rgblight_config.mode == 1) { + // same static color + LED_TYPE tmp_led; + sethsv(hue, sat, val, &tmp_led); + rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b); + } else { + // all LEDs in same color + if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { + // breathing mode, ignore the change of val, use in memory value instead + val = rgblight_config.val; + } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 14) { + // rainbow mood and rainbow swirl, ignore the change of hue + hue = rgblight_config.hue; + } else if (rgblight_config.mode >= 25 && rgblight_config.mode <= 34) { + // static gradient + uint16_t _hue; + int8_t direction = ((rgblight_config.mode - 25) % 2) ? -1 : 1; + uint16_t range = pgm_read_word(&RGBLED_GRADIENT_RANGES[(rgblight_config.mode - 25) / 2]); + for (uint8_t i = 0; i < RGBLED_NUM; i++) { + _hue = (range / RGBLED_NUM * i * direction + hue + 360) % 360; + dprintf("rgblight rainbow set hsv: %u,%u,%d,%u\n", i, _hue, direction, range); + sethsv(_hue, sat, val, (LED_TYPE *)&led[i]); + } + rgblight_set(); + } + } + rgblight_config.hue = hue; + rgblight_config.sat = sat; + rgblight_config.val = val; + if (write_to_eeprom) { + eeconfig_update_rgblight(rgblight_config.raw); + xprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + } else { + xprintf("rgblight set hsv [NOEEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + } + } +} + +void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) { + rgblight_sethsv_eeprom_helper(hue, sat, val, true); +} + +void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) { + rgblight_sethsv_eeprom_helper(hue, sat, val, false); +} + +uint16_t rgblight_get_hue(void) { + return rgblight_config.hue; +} + +uint8_t rgblight_get_sat(void) { + return rgblight_config.sat; +} + +uint8_t rgblight_get_val(void) { + return rgblight_config.val; +} + +void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) { + if (!rgblight_config.enable) { return; } + + for (uint8_t i = 0; i < RGBLED_NUM; i++) { + led[i].r = r; + led[i].g = g; + led[i].b = b; + } + rgblight_set(); +} + +void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index) { + if (!rgblight_config.enable || index >= RGBLED_NUM) { return; } + + led[index].r = r; + led[index].g = g; + led[index].b = b; + rgblight_set(); +} + +void rgblight_sethsv_at(uint16_t hue, uint8_t sat, uint8_t val, uint8_t index) { + if (!rgblight_config.enable) { return; } + + LED_TYPE tmp_led; + sethsv(hue, sat, val, &tmp_led); + rgblight_setrgb_at(tmp_led.r, tmp_led.g, tmp_led.b, index); +} + +void rgblight_set(void) { + if (!rgblight_config.enable) { + for (uint8_t i = 0; i < RGBLED_NUM; i++) { + if (i == RGBLIGHT_FLED1 && i == RGBLIGHT_FLED2) + continue; + + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + } + } + + switch (fled_mode) { + case FLED_OFF: + setrgb(0, 0, 0, &led[RGBLIGHT_FLED1]); + setrgb(0, 0, 0, &led[RGBLIGHT_FLED2]); + break; + + case FLED_INDI: + copyrgb(&fleds[0], &led[RGBLIGHT_FLED1]); + copyrgb(&fleds[1], &led[RGBLIGHT_FLED2]); + break; + + case FLED_RGB: + sethsv(fled_hs[0].hue, fled_hs[0].sat, fled_val, &led[RGBLIGHT_FLED1]); + sethsv(fled_hs[1].hue, fled_hs[1].sat, fled_val, &led[RGBLIGHT_FLED2]); + break; + + default: + break; + } + + ws2812_setleds(led, RGBLED_NUM); +} + +#ifdef RGBLIGHT_ANIMATIONS + +// Animation timer -- AVR Timer3 +void rgblight_timer_init(void) { + // static uint8_t rgblight_timer_is_init = 0; + // if (rgblight_timer_is_init) { + // return; + // } + // rgblight_timer_is_init = 1; + // /* Timer 3 setup */ + // TCCR3B = _BV(WGM32) // CTC mode OCR3A as TOP + // | _BV(CS30); // Clock selelct: clk/1 + // /* Set TOP value */ + // uint8_t sreg = SREG; + // cli(); + // OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff; + // OCR3AL = RGBLED_TIMER_TOP & 0xff; + // SREG = sreg; + + rgblight_timer_enabled = true; +} +void rgblight_timer_enable(void) { + rgblight_timer_enabled = true; + dprintf("TIMER3 enabled.\n"); +} +void rgblight_timer_disable(void) { + rgblight_timer_enabled = false; + dprintf("TIMER3 disabled.\n"); +} +void rgblight_timer_toggle(void) { + rgblight_timer_enabled ^= rgblight_timer_enabled; + dprintf("TIMER3 toggled.\n"); +} + +void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) { + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(r, g, b); +} + +void rgblight_task(void) { + if (rgblight_timer_enabled) { + // mode = 1, static light, do nothing here + if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { + // mode = 2 to 5, breathing mode + rgblight_effect_breathing(rgblight_config.mode - 2); + } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { + // mode = 6 to 8, rainbow mood mod + rgblight_effect_rainbow_mood(rgblight_config.mode - 6); + } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { + // mode = 9 to 14, rainbow swirl mode + rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); + } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { + // mode = 15 to 20, snake mode + rgblight_effect_snake(rgblight_config.mode - 15); + } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { + // mode = 21 to 23, knight mode + rgblight_effect_knight(rgblight_config.mode - 21); + } else if (rgblight_config.mode == 24) { + // mode = 24, christmas mode + rgblight_effect_christmas(); + } else if (rgblight_config.mode == 35) { + // mode = 35, RGB test + rgblight_effect_rgbtest(); + } + } +} + +// Effects +void rgblight_effect_breathing(uint8_t interval) { + static uint8_t pos = 0; + static uint16_t last_timer = 0; + float val; + + if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_BREATHING_INTERVALS[interval])) { + return; + } + last_timer = timer_read(); + + + // http://sean.voisen.org/blog/2011/10/breathing-led-with-arduino/ + val = (exp(sin((pos/255.0)*M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER/M_E)*(RGBLIGHT_EFFECT_BREATHE_MAX/(M_E-1/M_E)); + rgblight_sethsv_noeeprom_old(rgblight_config.hue, rgblight_config.sat, val); + pos = (pos + 1) % 256; +} +void rgblight_effect_rainbow_mood(uint8_t interval) { + static uint16_t current_hue = 0; + static uint16_t last_timer = 0; + + if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval])) { + return; + } + last_timer = timer_read(); + rgblight_sethsv_noeeprom_old(current_hue, rgblight_config.sat, rgblight_config.val); + current_hue = (current_hue + 1) % 360; +} +void rgblight_effect_rainbow_swirl(uint8_t interval) { + static uint16_t current_hue = 0; + static uint16_t last_timer = 0; + uint16_t hue; + uint8_t i; + if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_RAINBOW_SWIRL_INTERVALS[interval / 2])) { + return; + } + last_timer = timer_read(); + for (i = 0; i < RGBLED_NUM; i++) { + hue = (360 / RGBLED_NUM * i + current_hue) % 360; + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); + } + rgblight_set(); + + if (interval % 2) { + current_hue = (current_hue + 1) % 360; + } else { + if (current_hue - 1 < 0) { + current_hue = 359; + } else { + current_hue = current_hue - 1; + } + } +} +void rgblight_effect_snake(uint8_t interval) { + static uint8_t pos = 0; + static uint16_t last_timer = 0; + uint8_t i, j; + int8_t k; + int8_t increment = 1; + if (interval % 2) { + increment = -1; + } + if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_SNAKE_INTERVALS[interval / 2])) { + return; + } + last_timer = timer_read(); + for (i = 0; i < RGBLED_NUM; i++) { + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + for (j = 0; j < RGBLIGHT_EFFECT_SNAKE_LENGTH; j++) { + k = pos + j * increment; + if (k < 0) { + k = k + RGBLED_NUM; + } + if (i == k) { + sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), (LED_TYPE *)&led[i]); + } + } + } + rgblight_set(); + if (increment == 1) { + if (pos - 1 < 0) { + pos = RGBLED_NUM - 1; + } else { + pos -= 1; + } + } else { + pos = (pos + 1) % RGBLED_NUM; + } +} +void rgblight_effect_knight(uint8_t interval) { + static uint16_t last_timer = 0; + if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) { + return; + } + last_timer = timer_read(); + + static int8_t low_bound = 0; + static int8_t high_bound = RGBLIGHT_EFFECT_KNIGHT_LENGTH - 1; + static int8_t increment = 1; + uint8_t i, cur; + + // Set all the LEDs to 0 + for (i = 0; i < RGBLED_NUM; i++) { + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + } + // Determine which LEDs should be lit up + for (i = 0; i < RGBLIGHT_EFFECT_KNIGHT_LED_NUM; i++) { + cur = (i + RGBLIGHT_EFFECT_KNIGHT_OFFSET) % RGBLED_NUM; + + if (i >= low_bound && i <= high_bound) { + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[cur]); + } else { + led[cur].r = 0; + led[cur].g = 0; + led[cur].b = 0; + } + } + rgblight_set(); + + // Move from low_bound to high_bound changing the direction we increment each + // time a boundary is hit. + low_bound += increment; + high_bound += increment; + + if (high_bound <= 0 || low_bound >= RGBLIGHT_EFFECT_KNIGHT_LED_NUM - 1) { + increment = -increment; + } +} + + +void rgblight_effect_christmas(void) { + static uint16_t current_offset = 0; + static uint16_t last_timer = 0; + uint16_t hue; + uint8_t i; + if (timer_elapsed(last_timer) < RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL) { + return; + } + last_timer = timer_read(); + current_offset = (current_offset + 1) % 2; + for (i = 0; i < RGBLED_NUM; i++) { + hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + current_offset) % 2) * 120; + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); + } + rgblight_set(); +} + +void rgblight_effect_rgbtest(void) { + static uint8_t pos = 0; + static uint16_t last_timer = 0; + static uint8_t maxval = 0; + uint8_t g; uint8_t r; uint8_t b; + + if (timer_elapsed(last_timer) < pgm_read_word(&RGBLED_RGBTEST_INTERVALS[0])) { + return; + } + + if( maxval == 0 ) { + LED_TYPE tmp_led; + sethsv(0, 255, RGBLIGHT_LIMIT_VAL, &tmp_led); + maxval = tmp_led.r; + } + last_timer = timer_read(); + g = r = b = 0; + switch( pos ) { + case 0: r = maxval; break; + case 1: g = maxval; break; + case 2: b = maxval; break; + } + rgblight_setrgb(r, g, b); + pos = (pos + 1) % 3; +} + +#endif /* RGBLIGHT_ANIMATIONS */ diff --git a/keyboards/mxss/rules.mk b/keyboards/mxss/rules.mk new file mode 100644 index 0000000000..f46ae63743 --- /dev/null +++ b/keyboards/mxss/rules.mk @@ -0,0 +1,75 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +# Remove the common RGB light code and use my iteration instead +OPT_DEFS += -DRGBLIGHT_ENABLE +SRC += rgblight.c +SRC += ws2812.c +CIE1931_CURVE = yes +LED_BREATHING_TABLE = yes diff --git a/keyboards/mxss/templates/keymap.c b/keyboards/mxss/templates/keymap.c new file mode 100644 index 0000000000..86a0f231d8 --- /dev/null +++ b/keyboards/mxss/templates/keymap.c @@ -0,0 +1,42 @@ +/* Copyright 2018 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "mxss_frontled.h" + +// Helpful defines +#define _______ KC_TRNS + +// Predefined colors for layers +// Format: {hue, saturation} +// {0, 0} to turn off the LED +// Add additional rows to handle more layers +hs_set layer_colors[] = { + [0] = {0, 0}, // Color for Layer 0 + [1] = {86, 255}, // Color for Layer 1 + [2] = {36, 255}, // Color for Layer 2 + [3] = {185, 255}, // Color for Layer 3 +}; +const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t); + +// Use NEW_SAFE_RANGE to define new custom keycodes in order to not overwrite the ones used for front LED control +enum custom_keycodes { + MY_KEYCODE = NEW_SAFE_RANGE, +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +__KEYMAP_GOES_HERE__ +}; \ No newline at end of file