qmk_firmware/keyboards/hhkb/jp/config.h

/*
Copyright 2012 Jun Wako <wakojun@gmail.com>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID       0x4848 // HH = happy hacking
#define PRODUCT_ID      0x0002 // HHKB JP
#define DEVICE_VER      0x0104
#define MANUFACTURER    q.m.k
#define PRODUCT         HHKB mod

/* key matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 8

#define TAPPING_TERM    200

/* number of backlight levels */
#define BACKLIGHT_LEVELS 3

/* Set 0 if debouncing isn't needed */
#define DEBOUNCE    5

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE

#ifdef HHKB_RN42_ENABLE
// rn42 support -- acquired from the tmk repo. This is almost certainly not
// integrated with qmk in the correct way.

#define SUART_OUT_PORT  PORTD
#define SUART_OUT_BIT   0
#define SUART_IN_PIN    PIND
#define SUART_IN_BIT    1

#ifdef __AVR_ATmega32U4__
    #define SERIAL_UART_BAUD        115200
    #define SERIAL_UART_DATA        UDR1
    #define SERIAL_UART_UBRR        ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
    #define SERIAL_UART_RXD_VECT    USART1_RX_vect
    #define SERIAL_UART_TXD_READY   (UCSR1A&(1<<UDRE1))
    #define SERIAL_UART_INIT()      do { \
        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
        UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8);  /* baud rate */ \
        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
        UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
        UCSR1C |= (0<<UPM11) | (0<<UPM10);  /* parity: none(00), even(01), odd(11) */ \
        UCSR1D |= (0<<RTSEN) | (0<<CTSEN);  /* RTS, CTS(no flow control by hardware) */ \
        DDRD |= (1<<5); PORTD &= ~(1<<5);   /* RTS for flow control by firmware */ \
        sei(); \
    } while(0)
    #define SERIAL_UART_RTS_LO()    do { PORTD &= ~(1<<5); } while (0)
    #define SERIAL_UART_RTS_HI()    do { PORTD |=  (1<<5); } while (0)
#else
    #error "USART configuration is needed."
#endif

/* power control of key switch board */
#define HHKB_POWER_SAVING

#endif

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
*/

/* disable debug print */
//#define NO_DEBUG

/* disable print */
//#define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION